1. Attachments are working again! Check out this thread for more details and to report any other bugs.

(2007) P3000, P0AC0, P0AFA, power cuts out, and negative cell voltage?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by Mase, Jun 23, 2020.

  1. Mase

    Mase Junior Member

    Joined:
    May 10, 2020
    8
    0
    0
    Location:
    Seattle, WA
    Vehicle:
    2007 Prius
    Model:
    Touring
    I'm having this recurring issue where the car occasinally will get the red triangle, among a few other lights. Then the transmission starts to feel 'heavy?' like if it was stuck in first gear, at higher rpms it will actually cut out.

    Dr Prius shows the cells with 3 a bit low, then suddenly 2 will drop as well, then both of them drop to completely negative of what they were before, see the voltage difference of 30+.

    A couple weeks ago it seemed to be relatively normal. Average voltage difference was usually between 0.09 and 0.29.

    This has me thinking it must be some sort of loose connection or maybe something wrong with the bus bars. I don't have much electrical or prius experience so advice is very much appreciated! Screenshot_20200622-185903_Dr%20Prius.jpeg Screenshot_20200622-185906_Dr%20Prius.jpeg Screenshot_20200622-190220_Dr%20Prius.jpeg

    Posted via the PriusChat mobile app.
     
    #1 Mase, Jun 23, 2020
  2. Mase

    Mase Junior Member

    Joined:
    May 10, 2020
    8
    0
    0
    Location:
    Seattle, WA
    Vehicle:
    2007 Prius
    Model:
    Touring
    Oops, accidentally posted in Gen3, can a mod move it to gen2?

    Posted via the PriusChat mobile app.
     
    #2 Mase, Jun 23, 2020
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    maybe corrosion in the battery case or connectors. you really should read the codes when you get the triangle, it's a general warning, and nothing more
     
    #3 bisco, Jun 23, 2020
  4. Mase

    Mase Junior Member

    Joined:
    May 10, 2020
    8
    0
    0
    Location:
    Seattle, WA
    Vehicle:
    2007 Prius
    Model:
    Touring
    Here are the codes, from the obd2. The lights will also disappear by themselves after some time, and then reappear later. Screenshot_20200611-195148.jpeg

    Posted via the PriusChat mobile app.
     
    #4 Mase, Jun 23, 2020
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    sounds like some cells are getting weak or maybe corrosion or a combination.
     
    #5 bisco, Jun 25, 2020
  6. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,906
    16,213
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Block voltages jumping around and going negative are a sure indictment of the bundle of skinny sense wires used to sense those voltages, as you correctly guessed. From the other codes, I might guess there's a wire to the current sensor donut that's in similar shape.
     
    #6 ChapmanF, Jun 25, 2020
    SFO likes this.
(You must log in or sign up to post here.)