1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 Prius - Check Hybrid System after Orange Safety tab removal

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by moon_tanner, Mar 26, 2020.

  1. moon_tanner

    moon_tanner Junior Member

    Joined:
    May 29, 2016
    7
    1
    0
    Location:
    NW Florida
    Vehicle:
    2010 Prius
    Model:
    One
    Hello,

    I replaced the Brake ABS and Brake Acctuator.

    I disconnected the 12v batter and the orange safety plug to the hybrid batter before removing and installing the brake parts.

    The orange plug is back in, and the 12v battery is almost new.

    When in 'Ready' mode, the car won't go into drive. Only Park and Neutral.

    How can I do more troubleshooting in TechStream?

    Related Articles for others:

    2010 Prius ‘check hybrid system’ | PriusChat

    2010 Prius Check Hybrid System | PriusChat

    2010 prius Check Hybrid system and P lock malfunction | PriusChat
     
    #1 moon_tanner, Mar 26, 2020
    Last edited: Mar 26, 2020
  2. pjksr02

    pjksr02 Active Member

    Joined:
    Nov 2, 2009
    532
    225
    2
    Location:
    Connecticut
    Vehicle:
    2010 Prius
    Model:
    III
    What codes does Techstream show? (run Health Check for all systems)
     
    #2 pjksr02, Mar 26, 2020
  3. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,153
    50,058
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    many forget the third step of the safety plug, 'slide'
     
    #3 bisco, Mar 26, 2020
    Grit likes this.
  4. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,522
    1,796
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    I don't think it would go into "Ready" mode if the safety plug wasn't installed correctly.
     
    #4 RRxing, Mar 26, 2020
    tankyuong likes this.
  5. moon_tanner

    moon_tanner Junior Member

    Joined:
    May 29, 2016
    7
    1
    0
    Location:
    NW Florida
    Vehicle:
    2010 Prius
    Model:
    One
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    #5 moon_tanner, Mar 27, 2020
  6. moon_tanner

    moon_tanner Junior Member

    Joined:
    May 29, 2016
    7
    1
    0
    Location:
    NW Florida
    Vehicle:
    2010 Prius
    Model:
    One
    Thank you all for the help!

    2 new findings:

    1 - I didn't have the orange 'slide' pushed in. I slid the orange lock back in place.

    2 - Error code U0129 Lost connection with brake system control module.

    I bough the 'new' part from a junk yard, so it's very possible that the new brake booster has a bad brake control module. I plan on swapping the bad part back in the car and testing to see if the error goes away. If it does, I'll have to order yet another brake booster.

    I'll update y'all when it's done!
     
    #6 moon_tanner, Mar 27, 2020
    bisco likes this.
  7. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,153
    50,058
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    pleasure
     
    #7 bisco, Mar 27, 2020
  8. moon_tanner

    moon_tanner Junior Member

    Joined:
    May 29, 2016
    7
    1
    0
    Location:
    NW Florida
    Vehicle:
    2010 Prius
    Model:
    One
    Just an update,

    I put the old brake master cylinder in the prius, and the "Check Hybrid System" alert went away. Therefore, the problem was that the ECU didn't like the Lexus master cylinder, even though the part was supposed to be a direct fit.

    The old errors did return, but my original problem that started this post has been solved. Thank you!

    Image of errors after the old master cylinder put back in:

    [​IMG]
     
    #8 moon_tanner, Mar 30, 2020
(You must log in or sign up to post here.)