1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2012 Prius V Head Gasket issue!?

Discussion in 'Prius v Care, Maintenance and Troubleshooting' started by Bicycles, Mar 6, 2020.

Tags:
  1. Bicycles

    Bicycles New Member

    Joined:
    Mar 6, 2020
    20
    5
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius v wagon
    Model:
    V
    Howdy all, first post! I'm looking to get some stellar advice and I know this is the place for it!

    I just turned over 150k on my Prius V. I bought it used around 57k almost exactly four years ago. I'm in Los Angeles.

    No major issues... until now.

    I'm experiencing violent shaking when combustion engine starts. It gets less severe when I put it in neutral. It will shake for about 20 seconds normally, then everything runs fine. This happens about 50% of the time I start it up, for the past month. I remember it happening once or twice last year too but only isolated incidents.

    I got diagnostic codes for three cylinder misfires so I can't pass SMOG. Engine coolant level has lowered quickly.

    I was going to replace spark plugs myself when I realized I should just get the 150k tuneup. Took it into Electric Avenue in Silverlake and Mike told me it's most likely a blown head gasket (he did not do any inspection, just witnessed the shaking and got the error codes). He said it's smartest to replace the engine all together and he quoted me for $5500.

    I respectfully asked to take it for a second opinion elsewhere and he was nice enough to top off the coolant and check the oil. I took it to Prius Express on San Fernando and Rubek (Rubik?) said he'd install a 50k engine with pump for $2300 and throw in a 2-year warranty. It sounds too good to be true, so I'm skeptical.

    More strange is that driving from Silverlake to Glassell Park, the car ran smoother than I can remember in the past few months, no shaking no sputtering.

    Does anyone have a reputable mechanic in Los Angeles/SoCal? I am willing to travel for the best service.

    Also I'm willing to trade for work if anyone here is willing to help- I am a professional photographer and the price of a wedding shoot is right around the price/labor for this engine replacement... let me know!

    Thanks!
    Scott
     
    #1 Bicycles, Mar 6, 2020
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    gasket masters

    check the threads here and youtube

    i think they replace it in your driveway for $1,500.
     
    #2 bisco, Mar 7, 2020
  3. Bicycles

    Bicycles New Member

    Joined:
    Mar 6, 2020
    20
    5
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius v wagon
    Model:
    V
    Hi thanks but they are located up in NorCal.
     
    #3 Bicycles, Mar 7, 2020
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    #4 Mendel Leisk, Mar 7, 2020
  5. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,257
    15,491
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    #5 Raytheeagle, Mar 7, 2020
    Bicycles likes this.
  6. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,693
    39,238
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Spring for new head bolts?

    Also, when the dust settles on the head gasket repair: clean the EGR circuit and intake manifold. Consider oil catch can install too.
     
    #6 Mendel Leisk, Mar 7, 2020
    Raytheeagle likes this.
  7. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    24,915
    16,216
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    Of course I'm in the wrong part of the country to know about that shop.

    I did once have an engine put in by a too-good-to-be-true shop. The price was good, but they didn't put any oil back in the (manual) tranny. I caught that on the day I picked it up and refilled the tranny; it survived, but wasn't ever quite the same.

    Several months later the car disappeared from in front of my apartment overnight and the police found the sheet metal and carpet a few days later, a dozen blocks away.

    I will never have solid proof, but I suspect that shop more than a little. Profit margin on engine installation goes up when you install the same engine for multiple customers. Keep their addresses from the job tickets and you know where to get it again for the next job.
     
    #7 ChapmanF, Mar 7, 2020
    Bicycles, Air_Boss, scona and 1 other person like this.
  8. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,044
    1,112
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    Stuff that makes you say "Hmmmmm...."
     
    #8 Air_Boss, Mar 9, 2020
  9. Fierofly

    Fierofly Member

    Joined:
    Dec 3, 2017
    35
    41
    0
    Location:
    Benton, Louisiana
    Vehicle:
    2006 Prius
    Model:
    Two
    I had same issue with mine. Took it apart and found bad head gasket, BUT. It had 230k miles and I read about installing a newer engine, SO I decided to replace with a 2017 23k engine (cost $600). ALSO, I tore down old engine and found a bent rod, IF I had only replaced head gasket, IT would have broke that rod for sure. What happens with a bad gasket, is the hot engine shuts down and coolant gets in cylinder, then when it restarts it'll run rough due to hydra lock, bending or breaking a rod.
     
    #9 Fierofly, Mar 9, 2020
    Tim Jones likes this.
(You must log in or sign up to post here.)