07 Gen2 Prius Front LH Disc Brake Caliper Guide Pin/Bolt Part

Discussion in 'Gen 2 Prius Technical Discussion' started by NortTexSalv04Prius, Feb 12, 2020.

  1. NortTexSalv04Prius

    NortTexSalv04Prius Active Member

    Joined:
    Nov 14, 2009
    915
    115
    0
    Location:
    Texas
    Vehicle:
    2004 Prius
    Model:
    N/A
    I will need to replace to caliper guide pin bolts (plural) on LH side . I have a huge preference for OEM Toyota replacement parts. 47721A OEM number possible. However internet search are useless unless via dealership and only get complete caliper. I am hoping that dealers (Toyota) can either get guide pin complete or have a cross. Mr. Chapman and Patrick if you have any suggestion thanks in advance.
     
    #1 NortTexSalv04Prius, Feb 12, 2020
  2. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,180
    16,425
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    I pretty much go straight to parts.toyota.com lately.


    FRONT DISC BRAKE CALIPER & DUST COVER. 2007 Toyota Prius Hatchback HYBRID | Toyota


    You look at the picture, see the callout labels for the things you're looking for (47721A for the bolt, 47715A for the pin, 47775 for the boot), click the pink bits on the labels and get scrolled right down to the part numbers (90016-AA604, 47715-47010, 47775-02130, respectively). Zip zop.

    Are you sure you can justify the ninety-eight cents for that OEM bolt, though? Aftermarket could save you a bundle.

    The boots, of course, are also included in the complete rebuild rubber kit, 04478-47070 (all the rubbery bits and spring clips to rebuild two calipers, plus a packet of the proper grease).
     
    #2 ChapmanF, Feb 12, 2020
    NortTexSalv04Prius likes this.
  3. NortTexSalv04Prius

    NortTexSalv04Prius Active Member

    Joined:
    Nov 14, 2009
    915
    115
    0
    Location:
    Texas
    Vehicle:
    2004 Prius
    Model:
    N/A
    The aftermarket kits for example ROCKAUTO / AMAZON purchased past where possible Carlson /Dorman (China) knock offs that allowed for too much gap and loose play additionally pin and bolt where not even close too OE specs which for sure was lost in translation.
    I may chat with local dealer as well .....Thanks again
     
    #3 NortTexSalv04Prius, Feb 12, 2020
  4. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,180
    16,425
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    In case I forgot the emoji, I was kidding about saving a bundle cheaping out on a ninety-eight cent bolt.
     
    #4 ChapmanF, Feb 12, 2020
    NortTexSalv04Prius likes this.
  5. NortTexSalv04Prius

    NortTexSalv04Prius Active Member

    Joined:
    Nov 14, 2009
    915
    115
    0
    Location:
    Texas
    Vehicle:
    2004 Prius
    Model:
    N/A
    I am looking for the following OEM parts if anyone has access. Front strut (bolts/nut)14mm head that mount to knuckle.... additionally the rubber flap seal that goes on windshield cowl... thanks
     
    #5 NortTexSalv04Prius, Feb 13, 2020
  6. ChapmanF

    ChapmanF Senior Member

    Joined:
    Mar 30, 2008
    25,180
    16,425
    0
    Location:
    Indiana, USA
    Vehicle:
    2010 Prius
    Model:
    IV
    parts.toyota.com is your friend for looking that stuff up.
     
    #6 ChapmanF, Feb 13, 2020
    NortTexSalv04Prius likes this.
  7. NortTexSalv04Prius

    NortTexSalv04Prius Active Member

    Joined:
    Nov 14, 2009
    915
    115
    0
    Location:
    Texas
    Vehicle:
    2004 Prius
    Model:
    N/A
    Thanks …..
     
    #7 NortTexSalv04Prius, Feb 14, 2020
(You must log in or sign up to post here.)