I just took the head off because I over heated the engine and blew the head gasket... I took the head off, the timing cover too, of course, I had the head resurfaced at a machine shop and replaced everything with new gaskets and seals. I set the timing chain according to manual. Both yellow marks on chain together on the cam gears and one yellow mark forthe crank shaft gear. Now it will not start. Not even a cough. Just engine turning over for about 5 seconds and no start. I cleared all codes with TS. Not sure where to start looking... any suggestions? Thanks in advance!
The problem was a weak 12 V battery! It started and now runs great and no codes (imagine that...) . Thank YOU all for your responses~!
