1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2012 Prius Stabilizer bar end links exposed

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by smallschumi, Jan 21, 2020.

  1. smallschumi

    smallschumi Junior Member

    Joined:
    Oct 15, 2012
    42
    16
    0
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    I have 2012 Plug in with 180K miles. Just noticed that the stabilizer bar end links on driver side are exposed as the covering is torn. See attached photo. Haven't noticed any difference in ride quality.

    Is it safe to drive around for a while ? Have some long trips this month .

    Any upgrades recommended while I change the stabilizer bar

    Thanks in advance Stablilizer bar boot.jpg
     
    #1 smallschumi, Jan 21, 2020
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    Drive it til it makes noise
     
    #2 tankyuong, Jan 21, 2020
  3. elementnomore

    elementnomore Member

    Joined:
    Sep 5, 2013
    136
    44
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius
    Model:
    Four
    You’ll need 2 of these, $50 total Moog K750043 Stabilizer Bar Link Kit
     
    #3 elementnomore, Jan 21, 2020
    Fostel likes this.
  4. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    Had the same issue on mine at 202K. Noticed the joints were loose during an inspection. Replaced mine with a pair of CTR’s from our local supplier.

    59989202648__B70C88B9-76A1-48E7-B28A-D0F9DBF3FF35.JPG


    iPhone ? Pro
     
    #4 The Critic, Jan 22, 2020
    m.wynn, Aaron Vitolins and Raytheeagle like this.
  5. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,257
    15,491
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    Your Quick Jack is showing:p.

    Links look in similar condition to the OP's though(y).
     
    #5 Raytheeagle, Jan 22, 2020
    Montgomery and m.wynn like this.
  6. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    Yes, my biggest waste of money...


    iPhone ? Pro
     
    #6 The Critic, Jan 22, 2020
    Raytheeagle and m.wynn like this.
  7. iskoos

    iskoos Active Member

    Joined:
    Dec 24, 2017
    401
    246
    0
    Location:
    Orlando, FL
    Vehicle:
    2010 Prius
    Model:
    III
    Had the same issue except all four end boots were torn in my case and they were causing terrible noise as the front swayed.
    Replaced them with the Moog (same ones as elementnomore showed above).
    Don't think of OEMs. They are unnecessarily expensive.
     
    #7 iskoos, Jan 22, 2020
    elementnomore likes this.
  8. elementnomore

    elementnomore Member

    Joined:
    Sep 5, 2013
    136
    44
    0
    Location:
    Los Angeles
    Vehicle:
    2012 Prius
    Model:
    Four
    be sure to grease before you install :)
     
    #8 elementnomore, Jan 22, 2020
  9. smallschumi

    smallschumi Junior Member

    Joined:
    Oct 15, 2012
    42
    16
    0
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Thank you all.

    No annoying sounds yet. Guess, I can wait for some more time to crawl under the car
     
    #9 smallschumi, Jan 23, 2020
  10. Priuslover09

    Priuslover09 Member

    Joined:
    Jan 9, 2020
    365
    48
    0
    Location:
    Dc
    Vehicle:
    2009 Prius
    Model:
    ----USA----
    If it has sounds it’s bad if not it’s fine.
     
    #10 Priuslover09, Jan 25, 2020
(You must log in or sign up to post here.)