Question in engine compartment

They are all like that, as delivered. There is a $25-ish JDM grey plastic hood that can be bought to cover the forward splay of wires.

 

i've never had a problem with it

 

The cover is available as Lexus Part# 82821-7610. It is not available from Toyota.

 

Does seem absurd to only cover 50% of the connectors. Looks even worse than if they were all bare.

 

After Georgina recommended this in another thread, I ordered the part from lexuspartsnow.com, cost me $17, half of which was shipping. Snaps in place.

 

On that site, is there SOME way, after you've entered the part number, to circumvent the "what Lexus is this for?" question? This is driving me nuts lol. I tried to fake it out, said CT200, but no parts for me. No sir..., it knows...

 

I googled CT200h cars for sale and used the VIN from one of those- try
JTHKD5BH0D2170848

 

The hood is a tight fit in the retainer. Do the installation on a warm day after allowing the hood to soften up a bit so it clicks easily into place.

 

Is there a number missing in that part number? Should be two five digit numbers??

@Centerpunch would you know?

Addendum: think it's 82821-76010?

82821-76010 - Lexus Parts Now

Info:

Cover piece for the bare wires going into cpu in engine bay, driver's side:
82821-76010 (lexus part no)
lexuspartsnow.com
Lexus CT200h has it. One vin number: JTHKD5BH0D2170848 (website demands to know vehicle)

Nuther source, Japanese, which will ship to Canada:

Genuine Toyota 82821-76010 (8282176010) COVER, CONNECTOR - Amayama

 

Use a hair dryer to warm up the part. My wife laughs every time I take my golf shoes from the unheated garage into the bathroom and borrow her hair dryer to warm them up.

 

82821-76010 - Lexus Parts Now

I'm sure you can order it from any Lexus dealer.

 

You can. There's where I got mine.

 

I just ordered through the Amayama site (Japanese site, linked above). Had a little trouble getting through the payment process, they suggested to try a different browser, and that did the trick. $15.07 CDN (with shipping, $4.96 for the part), and looking at 2~3 weeks to come.

 

Very nicely packaged item arrived today, across the Pacific from Amayama, in Osaka, Japan.




Clicked into place very positively, nicely made, should have been there all along.

 

Just to stir the pot a bit more, this is on the left side of the inverter (engine side, air filter box at bottom of pic), some bare wires going in. Notice the grey plastic lever surround, which looks similar to the lever at the missing cover on ECU. Wonder if there's a (Lexus?) part for this?



I appreciate there's a full inverter cover, but I'm thinking just for these exposed wires.

 

There is. See this thread: Why does one of the ECU connectors not have a wire cover? | PriusChat

 

That link is only about the missing ECU cover? I've got that one (see my directly previous post). The one I'm noticing now is on the passenger side of the inverter. Might be turd polishing, but meh.

 

Can someone tell, if this cover (82821-76010) would fit (or is needed at all) the 11/2019 TOYOTA YARIS (NSP150L-HHXDGG)?

A friend of mine has the Yaris. If I buy it for my Prius, I could buy one for him too, but I'm pretty sure, he can not tell me, if it fits