2008 gen 2 Prius Looking for the passenger side quarter panel, passenger headlight assembly (HID), front bumper, maybe hood I’m in SoCal No insurance trying to put this one back together on my own. Also there was a plastic reservoir sitting low next to the radiator on the passenger side, anyone know what it is? Kinda just inside the passenger front tire but almost looked like it connected to the air intake. anyway thanks for any help! I’m new here so be mean. I’ll keep updates with photos on the rebuild if anyone’s interested
Shouldn't be a tank on the pass. side, I believe what you are describing is a resonator/baffle for the intake. Start pealing the onion, as you likely are going to needs several parts. The A pillar may be your demise.
It's the windshield washer fluid tank... Also it the front fender, not quarter panel which is in the rear of a car. Your biggest problem in this rebuild is you're going to have to cut out and weld in new frame frame parts that the fender will bolt on to... Lots of expensive work unless you know how to do your own welding.
In a Gen 2 or Gen 1, you're probably looking at the intake resonator down there. In Gen 3 it might be washer fluid (the Gen 3 intake resonators are the various black gnarbles you see on the intake duct with the hood up).
