Post ICE coolant change - advice needed

I replaced my ICE coolant about a week ago. I used a multimeter to jump the CHRS pump. I got it to 4.20 .
I tried putting the prius in maintenance mode and bleeding the radiator but after 1/2 hour, nothing ever came out. I repeated this the next day and got my multimeter down to 4.16 but still nothing from opening the radiator bleeder valve and running the prius on maintenance mode. I get great heat when I run the AC on Hi. I have coolant in the reservoir level right between Low and Full.

What I do every morning is check for leaks (none found in a week's time) and add coolant to the top of the radiator cap before driving the car (~20 miles each day total) I usually add about an inch of coolant each day. This has gone on for 5 days so far.

My question is: If I continue doing this each day, will it get to the point where the radiator cap will stay full after another week or two of this routine or should I retry the pump/radiator bleed combo?

 

Thanks Ray. I needed that affirmation that I'm doing right by the car, esp. with my first coolant change.