Mechanics: what are your most common tools?

Google let me down completely on this one. I'm looking for a screwdriver with a socket connector on the end, say 3/8". Basically what you'd have if you took a ratchet wrench extension, and stuck a screwdriver handle on the end of it. I cobbled up an image:


This is not a permanently attached socket, you can pull it off, put on another size.

I've asked this before, someone gave me a link, but I didn't get on it.

 

Here you go.

 

…I think I have something similar in my kit. It's either PittsburgTools (HarborFreight) or DeWalt (HomeBoyDespot) (…might even be "Husky"); I'll take a look-see next time I'm down in Chuggy's lair!

 

​

 

brook stone?

 

​

 

i had a whole collection of their tools, with no grease marks

 

​

 

Here you are, fresh from the lair: The Pittsburgh handle is ¼" square-drive, is extendable (see pic #2), and has a ¼" square receiver at the bottom end of the handle. Pic #3 shows some of the other extensions and gubbinses which might also be useful.

#1


#2


#3

 

Have @William Redoubt 's link in a "cart". Selection more limited up here, but found it.

Thanks all.

 

The tool WilDavis has shown is one that I have in my tool bag. ... Thank You Harbor Freight. ... LOL @ ME ... because I couldn't find a pic. Good job WilDavis.

The first set that I posted are what I use the most. I get a better feeling of the torque I want with them and I can get into tighter places.

 

…d'ya have his card info. too? (…heh! …heh!)

 

…thanks! The original post triggered a flash-back, and I had to pay a quick visit to the garage to check for myself (a) exactly what it was, and (b) that I still had it (…age catching up with me, I guess!)

 

Have at it, boys! Lot's of cards.

 

Last two times at Harbor Freight, I left without getting anything, looks like I need to go back and find a set like yours. Do you have a part #, couldn't find it on their site.

 

​

3 Pc Thumbwheel Ratchet Set
Pittsburgh Professional, Item #:94011

​

 

​

1/4 In. Drive Telescoping Socket Driver
Pittsburgh Professional, Item #:67978

 

Thanks! @Zeppo Shanski , I think I got mine piece-meal, i.e. not in a complete set, but in various pieces at different times. I always find when I visit HarborFreight it's dangerous to (1) stay too long, and (2) to be carrying a credit-card! I must keep an eye out for those thumb-wheel sets!

 

I just went today. Picked up a new hand-truck. ... $35 otd. w/ 20% off coupon.

​

 

i don't need one very often, but they can really come in handy