1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Engine rattling

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Dan05979, Jul 16, 2019.

  1. Dan05979

    Dan05979 Member

    Joined:
    May 24, 2015
    181
    101
    0
    Location:
    New York City/Upstate NY
    Vehicle:
    2010 Prius
    Model:
    III
    I had a cylinder 1 & 4 misfire, I changed all 4 ignition coils, spark plugs and my engine is still rattling and i'm getting a P0010 camshaft position sensor & P0324. Now the Check hybrid system is lit up & i think it's because the batteries are low and the engine isn't strong enough to charge the hybrid battery ( i hope) Would a camshaft position sensor cause this rattling? I'm giving up soon and towing it to a mechanic.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    #1 Dan05979, Jul 16, 2019
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,047
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    have you cleaned the egr circuit?

    is it losing any coolant? burning any oil?
     
    #2 bisco, Jul 16, 2019
    spiralhelix likes this.
  3. spiralhelix

    spiralhelix Active Member

    Joined:
    Mar 15, 2019
    255
    217
    0
    Location:
    Illinois
    Vehicle:
    2011 Prius
    Model:
    Three
    Agreed with cleaning egr.

    Also, when changing ig coils, did you notice any oil on them? And oil running down from the valve cover?

    Nice ‘puter, I have the same one.

    A cam position sensor can cause issues and I believe it’s a inexpensive part, so not horrible to swap out, but I’m still leaning to egr cleaning with this project.


    -Spiral
     
    #3 spiralhelix, Jul 16, 2019
  4. Dan05979

    Dan05979 Member

    Joined:
    May 24, 2015
    181
    101
    0
    Location:
    New York City/Upstate NY
    Vehicle:
    2010 Prius
    Model:
    III
    I just replaced the entire egr system with a used one from a lexus ct200 low mileage. and I cleaned it before installing it. No oil on any of the spark plugs or coils just normal wearing look. No oil leaking from the valve cover just dirty oil from me getting some oil on the valve cover from adding oil.
    I just ordered a new cam sensor. Toyota wanted $145 for the part I went with one from 1AAuto.com for $40 hopefully this solves the problem.
     
    #4 Dan05979, Jul 16, 2019
    Last edited: Jul 16, 2019
    spiralhelix likes this.
  5. Dan05979

    Dan05979 Member

    Joined:
    May 24, 2015
    181
    101
    0
    Location:
    New York City/Upstate NY
    Vehicle:
    2010 Prius
    Model:
    III
    no coolant leaks and yes it's burning oil which is a common problem on these 2010 engines.
     
    #5 Dan05979, Jul 16, 2019
    Raytheeagle and bisco like this.
  6. spiralhelix

    spiralhelix Active Member

    Joined:
    Mar 15, 2019
    255
    217
    0
    Location:
    Illinois
    Vehicle:
    2011 Prius
    Model:
    Three
    glad to hear the misfire wasn't caused by a valve cover gasket leak then.
     
    #6 spiralhelix, Jul 16, 2019
    Raytheeagle likes this.
  7. Dan05979

    Dan05979 Member

    Joined:
    May 24, 2015
    181
    101
    0
    Location:
    New York City/Upstate NY
    Vehicle:
    2010 Prius
    Model:
    III
    If i change out the fuel injectors do I need to disconnect the plug from the fuel pump? Is there a write up for the gen 3 model? I'd like to change out all 4 injectors with reman oem ones while I have the intake manifold off.
     
    #7 Dan05979, Jul 30, 2019
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,132
    50,047
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    #8 bisco, Jul 30, 2019
  9. The Critic

    The Critic Resident Critic

    Joined:
    Oct 28, 2005
    3,193
    2,323
    0
    Location:
    CA
    Vehicle:
    2011 Prius
    Model:
    Three
    It is not entirely necessary, but turning off the fuel pump while the engine is idling (with scan tool or by disconnecting the fuse) will reduce the amount of fuel spilled.

    Removing the injectors is fairly easy on the 1.8L.
     
    #9 The Critic, Jul 30, 2019
    Raytheeagle likes this.
  10. Josue Gonzalez

    Josue Gonzalez New Member

    Joined:
    Oct 13, 2020
    1
    0
    0
    Location:
    Miami
    Vehicle:
    2010 Prius
    Model:
    Base
    Did fox the problem? And what was it?
     
    #10 Josue Gonzalez, Nov 19, 2020
(You must log in or sign up to post here.)