I ordered one of the European rear window wiper arms and a 20" wiper blade and all I can say is that in our climate I don't know why I waited. It is really nice to be able to see better out the rear window. I advise everyone too look into getting one!
Try this link: http://sigmaautomotive.com/jdm/prius/prius0405.php It's in the left column. $59 including silicone blade. There's a lot of stuff there... If you know how to use your browser's built-in page search function, look for "rear wiper". (Ctrl-F in Windows Internet Explorer) - Bob R.
How does the mounting look, hdrygas? I like the smooth look of the factory wiper, but it is dinky. Does the 20" blade leave the glass?
Yes it goes off the clear or visible portion of the glass at the top on to the blackened edge, it however stays on the glass. It is nice during the day time to look out and see the car behind you rather than 1/2 of it. The arm also tips up so you can clean the glass easily. Definite win win. It does not look bad a bit more delicate because of the lack of plastic cover but it is substantial enough to more than do the job. It is my opinion that dealers in this area should just take off the US arm and replace them with this one before they sell a Prius.
Interesting. Well you know the US stock wiper arm can lift too. Also, what's this silicone wiper thingy.
Yes, it lifts up, but only IF you first snap off the plastic cover. Inconvenient. THe silicone wiper thingy is the PIAA wiper blade. Instead of rubber, it's made of silicone. More durable, less affected by temperature (low or high) and much better in general. It IS more expensive though.
I will do pictures tomorrow. And I have to correct my post the wiper does touch the metal edge just a bit. I would guess .5 to .4 CM but you have too watch carefully. But I can see out the back!!
I'd like a larger rear wiper for my 2014 Prius 3 . I tried looking at that Sigma site and looks like they are for the 2nd generation. Will they fit mine ? Also , when I tried to click to order that, it didn't work. Sending a message doesn't seem to work either. I'm also looking to see if there's a larger wiper blade that will fit my existing arm. Chris
