Here is what im half way done. Ill make a full post later on with issues i had and what i had to do. It feels good. Like really good! And after 144908 on the odo the stock seats were in a bad way. Posted via the PriusChat mobile app.
Thumbs up like Bisco mentioned. Does that mean you will be do the passengers seat too? And how about the connector underneath and if the airbag functionality? regardless will wait on your full write up...... Just encase..... 2018 Subaru BRZ - Sports Car | Subaru Example of 2019 Subaru Brz.... 2019 Toyota 86 Sports Car | Track proven. Street ready. Toyota example same chassis
Yes ill be doing the passenger seat as well, actually 3 connectors underneath it. Wait for it all on the full writeup, should have that up end of the week Posted via the PriusChat mobile app.
CJSK, I'd love a real bucket seat like this and look forward to your write-up. Was there a particular reason for a BRZ as the source, or might other sources be as good?
The BRZ/FRS already has some (very little, but some) parts commonality with the Yaris/Aqua/Prius c. Beyond that, it's a very similar-sized cockpit. Much more likely to fit than the couches from an Escalade or something. Nice work, I bet it is going to have great support.
Thanks to TS and I happened to have a pair of seats from BRZ/86/FRS which was fitted in my previous ride Volvo C30 T5. I have all the original railings intact so I'll be doing the swap as soon as I find time.
What seat rails / brackets did you use? I want to run a bucket seat in mine but haven’t found what rails would work
BRZ/FRS/86 Seats on Prius C/Aqua NHP10 by Royston.K posted Feb 21, 2020 at 1:49 PM A little work to get these in. #1. Remove donor seats rail #2. Remove original seats rail #3. Bore donor seats mounting point for rail to be wider to fit original seat rail as they are wider than donor seats (Important step. Without doing this factory rail will be too tight and you will have issue with seat sliding mechanism) #4. Mount original seats rail onto donor seat #5. Plug & play with factory rail, airbag harness and seat belt buckle should also be plug & play. Please check the seat bolt as they are uncommon size.
