1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2010 Gen 3 P3004

Discussion in 'Gen 3 Prius Technical Discussion' started by snathanb, Mar 27, 2019.

  1. snathanb

    snathanb Junior Member

    Joined:
    Mar 21, 2011
    10
    0
    0
    Location:
    Richardson, TX
    Vehicle:
    2010 Prius
    Model:
    IV
    All,

    Got "Check Hybrid System" and no start when I tried to start the car on Sunday. Started with the 12v battery, as it was 8.5 years old. After replacing with a new battery, same code.

    Hooked up a basic obd2 scanner/Dr. Prius android app, and it throws code P3004. Unfortunately, it can't read the detail code. It does seem to show that all the battery cells look strong.

    Any ideas before I have this thing towed to the dealership?

    Thanks!
     
    #1 snathanb, Mar 27, 2019
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,141
    50,053
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    how many miles on her?

    could be connector or battery corrosion, bad ground, etc.
     
    #2 bisco, Mar 28, 2019
    Mendel Leisk likes this.
  3. snathanb

    snathanb Junior Member

    Joined:
    Mar 21, 2011
    10
    0
    0
    Location:
    Richardson, TX
    Vehicle:
    2010 Prius
    Model:
    IV
    128k
     
    #3 snathanb, Mar 28, 2019
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,141
    50,053
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    is it humid in your area?
     
    #4 bisco, Mar 28, 2019
    Mendel Leisk likes this.
  5. snathanb

    snathanb Junior Member

    Joined:
    Mar 21, 2011
    10
    0
    0
    Location:
    Richardson, TX
    Vehicle:
    2010 Prius
    Model:
    IV
    Yes, very.
     
    #5 snathanb, Mar 28, 2019
  6. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,141
    50,053
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    no way of knowing until you pull everything apart. rodents chewing on wires can be another issue.
     
    #6 bisco, Mar 28, 2019
  7. Gino Veltri

    Gino Veltri Member

    Joined:
    Dec 25, 2020
    412
    40
    0
    Location:
    80521
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    What wire harness is p3004 , no sub codes. Techstream is a bitch to set up
     
    #7 Gino Veltri, Aug 18, 2022
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,141
    50,053
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    practically the whole of the high voltage harness. problem can be at any point, battery, a/c compressor, tranny, or anywhere in between.

    you're right about tech stream. but if you're going to diy, a lot of work is involved all around. the work has to be worth more than paying someone, or else it isn't worth the trouble.
     
    #8 bisco, Aug 19, 2022
(You must log in or sign up to post here.)