Keyfob (non SKS) lost its programming??

Discussion in 'Gen 2 Prius Technical Discussion' started by Tboy160, Mar 2, 2019.

Tags:
  1. Tboy160

    Tboy160 Junior Member

    Joined:
    May 3, 2018
    26
    5
    0
    Location:
    Flint, MI
    Vehicle:
    2008 Prius
    Model:
    N/A
    I was working on the brakes, so I disconnected the negative battery cable (I would like another way to disable the brakes without doing this in the future, but thats not my immediate problem)
    While the battery was disconnected, I realized the key was in the slot. Car starts and works but now the keyless entry is not working at all. The red light comes on (I tried a new battery anyway, to no avail.)
    Is it possible that with the key in the slot and the 12v battery disconnected, it deprogrammed the Keyfob?
    This car also doesnt have the button under the steering wheel, nor buttons on the door handles. And I think this is the only fob I have.
     
    #1 Tboy160, Mar 2, 2019
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,600
    8,478
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Have you checked if your 12v battery is healthy? Above 12v? A fully charged 12v battery will be around 12.9v
     
    #2 JC91006, Mar 2, 2019
  3. Tboy160

    Tboy160 Junior Member

    Joined:
    May 3, 2018
    26
    5
    0
    Location:
    Flint, MI
    Vehicle:
    2008 Prius
    Model:
    N/A
    I went to Advanced Auto, battery tested good.
     
    #3 Tboy160, Mar 11, 2019
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    111,181
    50,611
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Not that I’ve ever heard of.

    If you can work on your own brakes, you should own a simple volt meter
     
    #4 bisco, Mar 11, 2019
  5. Skibob

    Skibob Senior Member

    Joined:
    Sep 14, 2018
    2,912
    1,501
    0
    Location:
    Northern California
    Vehicle:
    2006 Prius
    Model:
    N/A
    Have you tried disconnecting the 12v battery without the key in the slot?
     
    #5 Skibob, Mar 12, 2019
  6. Tboy160

    Tboy160 Junior Member

    Joined:
    May 3, 2018
    26
    5
    0
    Location:
    Flint, MI
    Vehicle:
    2008 Prius
    Model:
    N/A
    I did try this, did nothing.
     
    #6 Tboy160, Jul 8, 2019
  7. Tboy160

    Tboy160 Junior Member

    Joined:
    May 3, 2018
    26
    5
    0
    Location:
    Flint, MI
    Vehicle:
    2008 Prius
    Model:
    N/A
    Still have no idea what happened to this fob. Any ideas on how to reprogram the fob? I dont have the button under the steering wheel that does this.
     
    #7 Tboy160, Jul 8, 2019
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    111,181
    50,611
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    the button under the steering wheel just turns sks on/off, no programming. you can't lose programming.

    if it were me, i would satisfy myself that the low hanging fruit is okay, because its going to get complicated and expensive after that.

    12v health is good (12.4v minimum while car has been off 4 hours) all connections clean and tight.

    fob battery health and installed correctly

    no stuck buttons on fob and contacts clean

    rid chip didn't fall out of the fob
     
    #8 bisco, Jul 8, 2019
(You must log in or sign up to post here.)