1. Attachments are working again! Check out this thread for more details and to report any other bugs.

HU no battery input

Discussion in 'Gen 3 Prius Audio and Electronics' started by canserman, Feb 23, 2019.

  1. canserman

    canserman Junior Member

    Joined:
    Sep 14, 2018
    9
    4
    0
    Location:
    nz
    Vehicle:
    2011 Prius
    Model:
    N/A
    Hi guys I need some help here.

    Recently I've been having trouble with my HU in my Prius Gen 3 - it wouldn't start after car started. I took the HU out and found the HU was fine. After days of investigating, I finally found the 10 pin connector for ACC/BAT/GND wasn't giving BATT output on Pin 1. I searched the wiring diagram and found it's supposed to connect to L85 Junction connector. But where is that L85 junction connector?

    Also I'm not sure if L85 is the culprit. Is there anything else I should be checking?
     
    #1 canserman, Feb 23, 2019
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,166
    50,060
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    have you checked the fuse?
     
    #2 bisco, Feb 23, 2019
    canserman likes this.
  3. Elektroingenieur

    Elektroingenieur Senior Member

    Joined:
    Jan 8, 2017
    2,515
    3,268
    9
    Location:
    California
    Vehicle:
    2016 Prius
    Model:
    Three Touring
    If you have the Toyota Electrical Wiring Diagram (more info), look under Location & Routing > Instrument Panel > Position of Parts (RHD). On right-hand drive cars, L85 is on the left side, towards the top of the instrument panel, near a group of wire-to-wire connections between the engine and instrument panel wire harnesses.
    Aside from the 15A RAD NO.1 fuse, as @bisco kindly suggests, you may have noticed in the diagram that the circuit also goes through wire-to-wire connector AL4, terminal 7. If the fuse is OK, the trouble could be there, in one of the three sections of wire, in the connector at the head unit itself, or in the engine room junction block.
     
    #3 Elektroingenieur, Feb 24, 2019
    canserman likes this.
  4. canserman

    canserman Junior Member

    Joined:
    Sep 14, 2018
    9
    4
    0
    Location:
    nz
    Vehicle:
    2011 Prius
    Model:
    N/A
    Thanks Mate , the problem was the fuse!! I bought a new fuse and it works like a charm!
     
    #4 canserman, Feb 24, 2019
    bisco likes this.
  5. canserman

    canserman Junior Member

    Joined:
    Sep 14, 2018
    9
    4
    0
    Location:
    nz
    Vehicle:
    2011 Prius
    Model:
    N/A
    Thanks a lot for your reply. The problem was indeed the fuse. After I replaced it all work fine!
     
    #5 canserman, Feb 24, 2019
    Elektroingenieur likes this.
(You must log in or sign up to post here.)