Hood Latch

Should be perfectly flush.

 

Agreed. Perfectly flush.

Posted via the PriusChat mobile app.

 

The adjustment procedure and standard clearance measurements for the hood are in the Repair Manual (more info), under Vehicle Exterior: Door/Hatch: Hood. At the front of the car, the surface of the hood, for example, is supposed to be flush with the bumper cover, within -1.85 to 2.15 mm, and the gap between the hood and the bumper cover is supposed to be 1.85 to 5.85 mm.

The hinge bolts, hood lock bolts, and hood bumper cushions are all adjustable; if adjustments at the bolts are needed, the centering bolts used in the assembly plant supposedly must be replaced with standard ones. If the front end of the hood is too high, though, you may just need to turn the left and right bumper cushions.

 

Mine is flush with the bodywork but there is a good 1/4" gap at the front edge of the hood showing the rubber seal.

 

Nownow, did you find a way to adjust the hood? I have the same issue. I can push down on the hood to make it flush. It sits about a 1/4 inch too high. I looked at the spot where the hood latch locks shot, and I didn’t see any oval type holes to adjust/slide the latch down. If I can push the hood down, then I don’t think it’s the bumpers.

 

In your second picture there of the headlight, is the outside part of the headlight illuminated? Or is it just trick lighting?

Posted via the PriusChat mobile app.

 

That's the Parking Light (called Side light in some countries I think).

 

Oh, Hm, mine doesn't seem to do that or maybe I've just never looked closely enough? Out to the garage to find out lol

Posted via the PriusChat mobile app.

 

So I have one with the parking lights on and one with the headlights and parking lights on, but it doesn't seem to match the illuminated portion in the other picture that was posted. I was thinking their picture showed some sort of daytime running light or something. Maybe it has to do with different country requirements, or it could just be an optical illusion in the picture that makes the surround part look illuminated with white light (as opposed to the orange light in my picture of the parking/side marker lights)

Posted via the PriusChat mobile app.

 

No, it's white light. Must be a regional difference, I think it's been mentioned before. Lots of things in PRIUS are different depending on which continent you're on. Middle East get Full Size Spare Wheels!!!!! We have global window UP & DOWN - USA only gets DOWN.

Australian L-R 1) Headlight, 2) Parking Light, 3) FOG light with Parking Lights, 4) DRLs.



1,2 and 3 bring on rear lights, DRLs don't - which is dumb. If I'm on the Motorway, I put "2" on - the parking lights with tail-lights rather than DRLs - I like to be seen from behind.

 

Okay yeah USA Prius owner here, darn I really like the parking light set up you have then! Oh well. Hey, thank you very much for answering my questions! I appreciate it!

Posted via the PriusChat mobile app.