1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Engine swap question

Discussion in 'Gen 3 Prius Technical Discussion' started by cnc97, Jun 29, 2018.

Page 11 of 20
  1. padroo

    padroo Senior Member

    Joined:
    Jan 11, 2008
    2,763
    2,251
    13
    Location:
    Chesterton, Indiana Another third world country.
    Vehicle:
    2016 Prius
    Model:
    Four
    It's always good to have choices.
     
    #201 padroo, Aug 18, 2018
  2. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three
    When the choice is A: $1200 150k mile Gen 3 engine or B:$1000 8k mile Gen 4 engine that needs “massaged” or reusing “repaired” Gen 3 head, I think the obvious choice is the lower mile short block. At least it is for me.
     
    #202 cnc97, Aug 18, 2018
    m.wynn likes this.
  3. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Until you say to yourself "never again"
     
    #203 JC91006, Aug 18, 2018
    Raytheeagle likes this.
  4. ASRDogman

    ASRDogman Senior Member

    Joined:
    May 29, 2018
    6,421
    3,409
    0
    Location:
    Florida
    Vehicle:
    2010 Prius
    Model:
    Two
    Well, if someone has some extra cash, and time, they could buy a few Gen 4 engines and convert them to the Gen 3.
    They sell them ready to install!
     
    #204 ASRDogman, Aug 18, 2018
    JC91006 and Grit like this.
  5. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three
    Shhhh, the price on Gen 4 engines just went up!! LoL
     
    #205 cnc97, Aug 18, 2018
    Shane Burns, Aaron Vitolins, m.wynn and 2 others like this.
  6. Ragingfit

    Ragingfit Active Member

    Joined:
    Oct 21, 2015
    189
    246
    0
    Location:
    Aurora, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
     
    #206 Ragingfit, Aug 19, 2018
    Mendel Leisk, Shane Burns, scona and 10 others like this.
  7. Ragingfit

    Ragingfit Active Member

    Joined:
    Oct 21, 2015
    189
    246
    0
    Location:
    Aurora, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
     
    #207 Ragingfit, Sep 8, 2018
    qettyz, Mendel Leisk, RMB and 1 other person like this.
  8. Grit

    Grit Senior Member

    Joined:
    Aug 22, 2017
    6,173
    4,077
    1
    Location:
    Wilkes Land
    Vehicle:
    2012 Prius
    Model:
    Four
    Very cool, was that you’re project?
     
    #208 Grit, Sep 8, 2018
  9. Alltwocents

    Alltwocents Junior Member

    Joined:
    Sep 8, 2018
    9
    8
    0
    Location:
    ALABAMA
    Vehicle:
    2013 Prius
    Model:
    Luxury
    Thanks guys,
    I took the info and jumped on a 1k mile 4th gen motor for $800.
    The swap is going nice. Hope to have it running tomorrow.
     

    Attached Files:

    #209 Alltwocents, Sep 8, 2018
    Ragingfit, Shane Burns, RMB and 3 others like this.
  10. Threej

    Threej Member

    Joined:
    Jan 25, 2018
    99
    99
    0
    Location:
    Portland, OR
    Vehicle:
    2010 Prius
    Model:
    II
    Still waiting for the anecdote of taking the frankenprius to the dealer for an oil change :-D
     
    #210 Threej, Sep 9, 2018
    qettyz, amos, Mendel Leisk and 1 other person like this.
  11. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three
    Approaching 3000 miles on mine and not a hint of an issue at all. Showing 53.5 mpg on the HSI and that’s driving in Normal mode. No measurable oil loss or coolant usage.
     
    #211 cnc97, Sep 9, 2018
    amos, Shane Burns, m.wynn and 2 others like this.
  12. Shane Burns

    Shane Burns Member

    Joined:
    Oct 30, 2015
    94
    125
    0
    Location:
    SoCal
    Vehicle:
    2005 Prius
    Model:
    N/A
    Now I kinda want to buy a Prius with blown head gasket and swap 4th Gen engine in it!! I miss my Prius already! :oops:
     
    #212 Shane Burns, Sep 9, 2018
  13. amos

    amos Active Member

    Joined:
    Aug 19, 2017
    341
    281
    0
    Location:
    los angeles
    Vehicle:
    2016 Prius
    Model:
    Two
    @cnc97 i salute you for the courage and thibking out of the box.
    I read most of your threads and wanted to ask you for a summery of all items of the swap which were not identical and next to each one a summery of how you took care of it.like the dipstick etc... Hoping its not too time consuming for you
     
    #213 amos, Sep 11, 2018
  14. amos

    amos Active Member

    Joined:
    Aug 19, 2017
    341
    281
    0
    Location:
    los angeles
    Vehicle:
    2016 Prius
    Model:
    Two
    @cnc97 i salute you for the courage and thibking out of the box.
    I read most of your threads and wanted to ask you for a summery of all items of the swap which were not identical and next to each one a summery of how you took care of it.like the dipstick etc... Hoping its not too time consuming for you
     
    #214 amos, Sep 11, 2018
  15. cnc97

    cnc97 Senior Member

    Joined:
    Mar 13, 2018
    1,422
    1,532
    38
    Location:
    Evansville, IN
    Vehicle:
    2010 Prius
    Model:
    Three
    On my swap, I used my Gen 3 head. New head gasket and bolts. I reused the valve cover gasket from my engine. There’s an issue with FelPro and their part numbers for the Gen 3 motor. The only things correct in the entire head gasket set were the head gasket, exhaust manifold gasket, intake gasket, and the valve seals. The other miscellaneous gaskets in the set were wrong. I reused the EGR gaskets, water pump gasket, throttle body gasket, thermostat gasket.

    I used the chain and gears from the Gen 4 engine. Also the cams. New tensioner though. Timing cover and valve cover are Gen 3. I did buy a can of high temp black wrinkle finish paint for the valve cover. Gen 4 coils were a direct fit. Also Gen 4 fuel rail and injectors. However the rubber hose from Gen 4 fuel rail is different. The vehicle side connector is different. Use the rubber hose with connector from the Gen 3 motor.

    If anyone within 75 miles of Evansville IN has a need for a Gen 4 head, valve cover, intake, and some other miscellaneous hoses, drop me a PM. It’s taking up space, but it’s too valuable to just throw away. The head is missing one cylinder worth of valves.
     
    #215 cnc97, Sep 11, 2018
    Mendel Leisk, greasemonkey007, amos and 3 others like this.
  16. Ragingfit

    Ragingfit Active Member

    Joined:
    Oct 21, 2015
    189
    246
    0
    Location:
    Aurora, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
     
    #216 Ragingfit, Sep 23, 2018
    Last edited: Sep 23, 2018
    putty, Mendel Leisk, greasemonkey007 and 1 other person like this.
  17. greasemonkey007

    greasemonkey007 Active Member

    Joined:
    Sep 20, 2013
    287
    106
    0
    Location:
    South Central Arkansas
    Vehicle:
    2006 Prius
    Model:
    N/A
    Do you know if the ecu's are programmed the same? Could be kind of like 1st and 2nd gen 1.5L engines. Same size, but I think there are differences in the programming, VVT, and etc. Of course that is not rock solid assurance speaking though. I could be mistaken. Just saying, it's worth considering.
     
    #217 greasemonkey007, Sep 25, 2018
  18. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,667
    39,220
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Memorable quotes:

    "...you're looking at the part you wanna remove; just go ahead and remove it, yah know..."

    "...you're gonna be looking at this wire through the whole process, thinking: what do I do with this wire..."

    "... make sure you don't break the glass, cus this will be right where you don't want it, for this whole process..."

    "...if you're going to be hyper: don't be hyper there..."

    "...on the floor: the car's got leather, it doesn't get to sit on the seat..."

    Thank you, really good video, funny, invaluable tips, saving this. (y)

    Particularly like how you stay organized, the drawers and sticky notes. And the prep: things to do before you disconnect the batteries. And to take pictures/videos before you start pulling stuff off.

    The cowl and wipers sounds very similar to regular 3rd gen hatchback btw.

    Big question: the video is "part one". Going to YouTube I didn't see subsequent parts. Are they there, or are you still editing? Really like to see it through.

    This should be stickied, once the dust settles? @Tideland Prius ?
     
    #218 Mendel Leisk, Sep 25, 2018
    Last edited: Sep 25, 2018
  19. Ragingfit

    Ragingfit Active Member

    Joined:
    Oct 21, 2015
    189
    246
    0
    Location:
    Aurora, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    There are 8 parts, (about 3 hours edited) so far, on YouTube. Editing is time consuming, and no "do overs" on this, yet. More to come - the engine installation videos will go up as they are edited. And please forgive the quality and sometimes the noise. Next time, the compressor will go outside.
     
    #219 Ragingfit, Sep 25, 2018
    Mendel Leisk likes this.
  20. Ragingfit

    Ragingfit Active Member

    Joined:
    Oct 21, 2015
    189
    246
    0
    Location:
    Aurora, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    I took it on faith that mine would run as a Gen 3. On the Gen 4, there were changes to the engine, trans-axle and ECU/PCU, but there is no need to change the ECU/PCU.
     
    #220 Ragingfit, Sep 25, 2018
    Mendel Leisk likes this.
(You must log in or sign up to post here.)
Page 11 of 20