1. Attachments are working again! Check out this thread for more details and to report any other bugs.

p0420 error code. oxygen sensor bank 1 sensor 1 voltage constant 0.66 volts

Discussion in 'Gen 2 Prius Main Forum' started by chaircatmeow, Feb 12, 2017.

Tags:
  1. chaircatmeow

    chaircatmeow Junior Member

    Joined:
    Feb 12, 2017
    12
    3
    0
    Location:
    california
    Vehicle:
    2006 Prius
    Model:
    Base

    My 06 Prius gave me check engine light. OBDII says it's P0420. catalytic converter below efficiency.

    My OBD show that:
    oxygen bank1 sensor 1 voltage is constant is 0.66
    oxygen bank 2 sensor 2 voltage fluctuate

    I am suspicious that the bank1 sensor 1 is bad. My theory is that the voltage should be at least 3 volts and should fluctuate instead of being constant??? if it's constant, then the sensor must be bad. Can anyone confirm?

    My 06 Prius has fuel air ratio sensor instead of oxygen sensor. I am guessing that's what I need to buy and replace?
     
    #1 chaircatmeow, Feb 12, 2017
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,429
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    P0420 usually points to a bad catalytic converter
     
    #2 JC91006, Feb 12, 2017
    Samprocat likes this.
  3. valde3

    valde3 Senior Member

    Joined:
    Jun 28, 2014
    2,002
    745
    0
    Location:
    Finland
    Vehicle:
    2004 Prius
    What did you use to check the live data? If oxygen sensor 1 would actually stay at 0.66V it would have other codes as well. If oxygen sensor 2 switches (pretty fast) between rich and lean it can only be the catalytic converter.
     
    #3 valde3, Feb 13, 2017
  4. dolj

    dolj Senior Member

    Joined:
    May 14, 2012
    7,855
    3,968
    0
    Location:
    Wellington, New Zealand
    Vehicle:
    2007 Prius
    Model:
    N/A
    I'm surprised you have not got codes relating to a/f sensor (B1S1) and the rear o2 sensor ( B1S2) given the voltages you observed on those sensors.

    A P0420 is catalytic converter below efficiency, and does not necessarily mean the cat is bad.

    You are correct, B1S1 should show a fluctuating voltage and B1S2 should be a constant voltage. Are you sure you got the reading the right way around?
     
    #4 dolj, Feb 13, 2017
    SFO likes this.
  5. chaircatmeow

    chaircatmeow Junior Member

    Joined:
    Feb 12, 2017
    12
    3
    0
    Location:
    california
    Vehicle:
    2006 Prius
    Model:
    Base
    I found this useful technical documentation. It said voltage should be 3 volts indeed.
    I use bafx obd II tool to get live voltage data.

    I am surprised that it did not show sensor 1 malfunction code. Only p0420 code. It should have, as the voltage is only 0.66 "constantly. Anyway, I will try and replace a new air fuel ratio sensor and see if p0420 goes away
     

    Attached Files:

    #5 chaircatmeow, Feb 13, 2017
    Last edited: Feb 13, 2017
  6. valde3

    valde3 Senior Member

    Joined:
    Jun 28, 2014
    2,002
    745
    0
    Location:
    Finland
    Vehicle:
    2004 Prius
    Sounds more like the problem with your diagnostic tool/program. Best software to diagnose (and do maintenance for a Prius is Techstream. Mini-VCI is cheap and good way to get it. But just trying some other universal code reader might get the correct voltage information from oxygen sensor 1. Or of cource you can just measure the voltage from the connector before unnecessary replacing the sensor.
     
    #6 valde3, Feb 13, 2017
  7. Jedimaster80

    Jedimaster80 New Member

    Joined:
    Mar 14, 2018
    4
    5
    0
    Location:
    USA
    Vehicle:
    2004 Prius
    Model:
    II
    So did you ever get your P0420 code to go away? What did you have to do?
     
    #7 Jedimaster80, Apr 13, 2018
    anonymous and SFO like this.
(You must log in or sign up to post here.)