1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Wheel fitment question

Discussion in 'Gen 2 Prius Accessories & Modifications' started by Sergio180sx, Mar 4, 2018.

  1. Sergio180sx

    Sergio180sx Junior Member

    Joined:
    Mar 4, 2018
    19
    16
    0
    Location:
    Hesperia Ca
    Vehicle:
    2007 Prius
    Model:
    Two
    Hey everyone I just picked up a 07 Prius and wanted to throw some wheels on it not to worried about losing 3 mpg but wanted to know if I would be able to fit 18x8.5+35 I'm going towards Aodhan wheels
    [​IMG]
     
  2. Justdidit

    Justdidit LVNPZEV

    Joined:
    Jun 12, 2012
    1,880
    710
    75
    Location:
    Carrollton, Texas
    Vehicle:
    2007 Prius
    Model:
    Four Touring
    Probably gonna lose more than 3mpg. I ran 19x7.5 et45 and rubbed when I lowered it until I rolled my fenders. With a 18x8.5 AND a et35 , if your lowered at all you will rub on your front fender/bumper tab and your rear bumper tabs. But with some rolling and cutting... you may be fine.

    [​IMG]
     
    #2 Justdidit, Mar 5, 2018
    Last edited: Mar 5, 2018
    marvingloria2011 likes this.
  3. Sergio180sx

    Sergio180sx Junior Member

    Joined:
    Mar 4, 2018
    19
    16
    0
    Location:
    Hesperia Ca
    Vehicle:
    2007 Prius
    Model:
    Two
    I was just admiring your car and all the care you put into man, dang what size do you think is appropriate for the Prius where I don't have to cut any fenders? I don't really mind having to get them rolled IF I have to.
     
    marvingloria2011 likes this.
  4. Sergio180sx

    Sergio180sx Junior Member

    Joined:
    Mar 4, 2018
    19
    16
    0
    Location:
    Hesperia Ca
    Vehicle:
    2007 Prius
    Model:
    Two
    Ok guys ended up finding a steal of a deal!! Picked up a set of Advan RC2'S for $350!!! They fit perfect offset wise for my liking. Going to send them out this week to restore them and go triple gloss black with the white Advan decals, I obviously am going to have to lower the car. Lmk what you guys think!!

    Rim Size-17x8.5+45 square setup
    Tire Size-225/45/17
    01212_giy5Vl6W39w_600x450.jpg MVIMG_20180305_203703.jpg MVIMG_20180305_203852.jpg
     
    marvingloria2011, Justdidit and gta_ like this.
  5. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    I hope you know how to pull and roll your fenders.
     
  6. WilDavis

    WilDavis Senior Member

    Joined:
    Feb 4, 2014
    2,492
    2,154
    49
    Location:
    Top RH Corner of RH Coast on L side of The Pond
    Vehicle:
    2009 Prius
    Model:
    II
    Looks like you might be missing a lug-nut on the off-side fore! (…just sayin' ;))
     
    Sergio180sx likes this.
  7. Sergio180sx

    Sergio180sx Junior Member

    Joined:
    Mar 4, 2018
    19
    16
    0
    Location:
    Hesperia Ca
    Vehicle:
    2007 Prius
    Model:
    Two
    I will be getting the fenders rolled but my buddy, no need for a pull
     
    marvingloria2011 likes this.
  8. Sergio180sx

    Sergio180sx Junior Member

    Joined:
    Mar 4, 2018
    19
    16
    0
    Location:
    Hesperia Ca
    Vehicle:
    2007 Prius
    Model:
    Two
    Hey guys a update on my wheels, my buddy is fixing all the blemishes getting them ready to send out to powdercoat 16551.jpeg 16549.jpeg 16552.jpeg 16559.jpeg

    Pixel 2 XL ?
     
    wingfeathers, gta_ and Justdidit like this.
  9. Sergio180sx

    Sergio180sx Junior Member

    Joined:
    Mar 4, 2018
    19
    16
    0
    Location:
    Hesperia Ca
    Vehicle:
    2007 Prius
    Model:
    Two
    Picked them up from powdercoat yesterday, satin black came out nice I think. Going to be putting the white replacement Advan RCll decals on this weekend. MVIMG_20180410_191549.jpg

    Pixel 2 XL ?
     
    Justdidit likes this.
  10. WilDavis

    WilDavis Senior Member

    Joined:
    Feb 4, 2014
    2,492
    2,154
    49
    Location:
    Top RH Corner of RH Coast on L side of The Pond
    Vehicle:
    2009 Prius
    Model:
    II
  11. Sergio180sx

    Sergio180sx Junior Member

    Joined:
    Mar 4, 2018
    19
    16
    0
    Location:
    Hesperia Ca
    Vehicle:
    2007 Prius
    Model:
    Two
    The wheels are one with new shocks stock height because the wife drives it sometimes, looking to run 15mm spacers in the rear front is flush with no rub 00000IMG_00000_BURST20190324132221296_COVER.jpeg 00000IMG_00000_BURST20190324132233687_COVER.jpeg 00000IMG_00000_BURST20190326110618670_COVER.jpeg

    Pixel 2 XL ?
     
  12. Knightrider

    Knightrider Member

    Joined:
    Feb 21, 2019
    146
    34
    0
    Location:
    Kansas City
    Vehicle:
    2005 Prius
    Model:
    II
    Looks nice
    Id like to find some 16 w chunky rubber---
    It will happen
     
  13. 69shovlhed

    69shovlhed Surly tree hugger

    Joined:
    May 13, 2012
    2,170
    750
    0
    Location:
    Delaware
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Premium
    lookin sharp
     
  14. marvingloria2011

    marvingloria2011 Active Member

    Joined:
    Mar 21, 2012
    109
    162
    0
    Location:
    Winnipeg, Manitoba, Canada
    Vehicle:
    2012 Prius
    Model:
    III
    I rolled mine with a baseball bat. Found a video on YouTube that shows you how. Pretty easy.
     
  15. Knightrider

    Knightrider Member

    Joined:
    Feb 21, 2019
    146
    34
    0
    Location:
    Kansas City
    Vehicle:
    2005 Prius
    Model:
    II
    These look really nice-
    I have some mazda speed 18's w 225/40r18 I want to mount----
    but 17"s just look the part.