Hy can any 1 please help I changed my prius 2005 water pump and belt and after that heating not working
Welcome to Prius Chat . Some questions: Is the system completely bled of air, including the thermos? Does the heater turn on? Keep us posted .
Thanks for response I did but not like 20 minutes it' About 10 minutes and I opened just lead because the top bleeder are slipped and it was not opening And you now after the problem sign shown in the dashboard and when car went to maintenance mode and engine is keep running about and I add more coolent in after sometime main radiator fan automatic on and car throughing water out with bubbels I jump back into car in dashbord mentinence light was still on is it goes off automatic or not.and then i put engine off and start again and start driving
You probably still have more air in the system. Keep checking the radiator cap . Good luck and keep us posted .
You did fill it up at the radiator cap and not the overflow tank didn't you? It took me three hours to get the air out of my Gen 2.
Ok I try and let you know many thanks 1 more thing before change the pump coolent level goes down while it's happen only when driving not in stratinory
Was there coolant residue above or below the pump? Usually when the bearing fail on the pump coolant begins to leech out of the seal around the shaft and bearings which then puts coolant below the pump and on the underside of the hood as the pump is moving and it gets thrown upward. Hope that helps.
I put both side radiator and in overflow aswell today I left the both leads open start the engine and I was adding more water I put about 15 litter water and still taking more even I changed termostate today aswell don't know what happen heating still not working
