Hybrid Automotive Grid Charger Instructions

Discussion in 'Gen 2 Prius Technical Discussion' started by jlm1983, Jul 9, 2017.

Page 2 of 3
  1. MTL_hihy

    MTL_hihy Active Member

    Joined:
    Sep 2, 2013
    536
    261
    0
    Location:
    Maritimes, Canada
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Yes, after load testing I would replace both of those with good modules because one is toast and the other will be the next one to go for sure.
     
    #21 MTL_hihy, Jul 28, 2017
  2. jlm1983

    jlm1983 New Member

    Joined:
    Jun 19, 2017
    12
    4
    1
    Location:
    AR
    Vehicle:
    2006 Prius
    Model:
    N/A
    Well after replacing the second bad module and doing the 3 charge and discharges it looks like things may be working again. I finished Friday, took if for a drive around town on Saturday and everything seemed fine aside from the scary sounding clicks that come from the battery pack but I figure that noise is coming from some relays or something. We've probably put about 100 miles on it so far and it seems to be working great. I'm still looking for a cheap laptop for the techstream so I can see some live numbers. Hopefully I don't have to mess with this thing again for a few thousand miles but I will report back in a few months to let everybody know how it's going. Thanks for everybody's help.
     
    #22 jlm1983, Aug 2, 2017
    Raytheeagle likes this.
  3. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,600
    8,478
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Which one ended up being the 2nd bad module? Module 16 on your chart?

    Next time it'll be easier to identify the bad modules after the modules sit for 7 days. The higher self discharge and the load from a load test will show most bad modules. If you really want to see how the modules perform under high current demand, you can hit them with a 60A battery load tester.
     
    #23 JC91006, Aug 2, 2017
    Last edited: Aug 2, 2017
  4. jlm1983

    jlm1983 New Member

    Joined:
    Jun 19, 2017
    12
    4
    1
    Location:
    AR
    Vehicle:
    2006 Prius
    Model:
    N/A
    Yes, #16 on my chart was the other bad module. I am noticing that my gas mileage doesn't seem to be where it should. It's averaging around 35mpg. I had the 12v battery during this whole process so everything got reset. Just wondering if that's something that will straighten out after driving for awhile or should I be concerned?
     
    #24 jlm1983, Aug 3, 2017
  5. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,600
    8,478
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Maybe you should let it go 1 full tank. Many times during testing phases, you use a lot more fuel idling and doing other things. So best to calculate from your fill up on the next tank.
     
    #25 JC91006, Aug 3, 2017
    Raytheeagle likes this.
  6. MTL_hihy

    MTL_hihy Active Member

    Joined:
    Sep 2, 2013
    536
    261
    0
    Location:
    Maritimes, Canada
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Not surprised on the bad module, wait a few tanks before drawing any conclusions on MPG.
     
    #26 MTL_hihy, Aug 8, 2017
  7. jlm1983

    jlm1983 New Member

    Joined:
    Jun 19, 2017
    12
    4
    1
    Location:
    AR
    Vehicle:
    2006 Prius
    Model:
    N/A
    Just an update. The gas mileage definitely improved after driving it for a week or so. It seemed like it was getting back to normal. After driving about two and a half weeks the car was involved in a wreck so I can't say much about it after that.
     
    #27 jlm1983, Aug 27, 2017
    Raytheeagle likes this.
  8. Raytheeagle

    Raytheeagle Senior Member

    Joined:
    Jul 1, 2016
    11,261
    15,499
    0
    Location:
    Bay Area, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Plus
    Sorry to hear about the wreck :(. Hope everyone is ok.

    Thanks for reporting back;). Every data point helps (y).
     
    #28 Raytheeagle, Aug 27, 2017
  9. Sanjay Goel

    Sanjay Goel Member

    Joined:
    Feb 13, 2018
    83
    57
    0
    Location:
    Dallas, TX
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Isn't Torgue Pro the app that works with Bluetooth adapters? Is this app really able to monitor the Hybrid batter status at this level? Asking because I have been actively searching for the Mini VCI cable and TIS for my newly acquired 2010 HiHy.
     
    #29 Sanjay Goel, Feb 27, 2018
    edthefox5 likes this.
  10. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    12,285
    11,620
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    @TMR-JWAP has done a lot of monitoring & charting of battery performance with Android apps. I think Torque Pro is one he uses.
     
    #30 Prodigyplace, Feb 27, 2018
  11. edthefox5

    edthefox5 Senior Member

    Joined:
    Jul 25, 2007
    10,096
    4,827
    0
    Location:
    Clearwater, Florida
    Vehicle:
    2007 Prius
    Model:
    Two
    Can’t be that actively searching it’s on amazon.om
    If you google it you will see it on amazon.
     
    #31 edthefox5, Feb 27, 2018
    Sanjay Goel likes this.
  12. Sanjay Goel

    Sanjay Goel Member

    Joined:
    Feb 13, 2018
    83
    57
    0
    Location:
    Dallas, TX
    Vehicle:
    Other Hybrid
    Model:
    N/A
    You got me there edthefox5 :)

    what I meant to say was "researching" because this seems to be not an easy plug and play item. There are lots of reports of people buying these but never being able to get them to work... -- which is why I am being cautious on pulling the trigger. I actually ordered one of Amazon but canceled after I found out that I should look for at least 2.0.4 firmware on the cable. The one I had ordered was 1.4.x
     
    #32 Sanjay Goel, Feb 28, 2018
  13. Sanjay Goel

    Sanjay Goel Member

    Joined:
    Feb 13, 2018
    83
    57
    0
    Location:
    Dallas, TX
    Vehicle:
    Other Hybrid
    Model:
    N/A
    If @TMR-JWAP or someone here can confirm that the Torque Pro app with a decent OBD2 Bluetooth sensor works well and can provide module level details of the Hybrid Battery - I would rather get that than getting a Mini VCI cable and run through hoops trying to get the TIS software working on my Windows 10 (64 bit) laptop.

    Can someone please throw light on this subject?

    Can this setup (Torque Pro app + Elm327 Bluetooth sensor/reader) also with replacing TPMS when the time comes?

    Or is there any specific / different from generic Elm327 that is required for Toyota vehicles?
     
    #33 Sanjay Goel, Feb 28, 2018
  14. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    12,285
    11,620
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    #34 Prodigyplace, Feb 28, 2018
  15. ericbecky

    ericbecky Hybrid Battery Hero

    Joined:
    Mar 12, 2004
    4,379
    3,238
    1
    Location:
    Madison, Wisconsin
    Vehicle:
    2005 Prius
    Model:
    Two
    TorquePro is good for live data, recording data, as well as reading and clearing codes.

    TorquePro will not help with TPMS. (Nor programming keys, nor unclearable error codes, nor brake bleeding, etc)
    You need techstream for that.

    Get an old XP machine if you want to make things easy for yourself when installing Techstream.
     
    #35 ericbecky, Feb 28, 2018
    Raytheeagle likes this.
  16. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    12,285
    11,620
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    Has Toyota not updated Techstream to work with a supported operating system?
     
    #36 Prodigyplace, Mar 1, 2018
    Sanjay Goel and Raytheeagle like this.
  17. Prodigyplace

    Prodigyplace 2025 Camry XLE FWD

    Joined:
    Nov 1, 2016
    12,285
    11,620
    0
    Location:
    Central Virginia
    Vehicle:
    Other Hybrid
    Model:
    XLE
    #37 Prodigyplace, Mar 1, 2018
    Sanjay Goel likes this.
  18. Sanjay Goel

    Sanjay Goel Member

    Joined:
    Feb 13, 2018
    83
    57
    0
    Location:
    Dallas, TX
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Good to know this ericbecky. I am, at least at the present time, not much interested in monitoring live data. All I want to do at this time is to be able to take a snapshot of all details of the current status of my HV battery. And then do the same after I have done the battery reconditioning using Hybrid Automotive's products in order to compare and see what actual improvements in the parameters is seen.

    All 3 vehicles in our stable are Toyota /Lexus and recently my son's 1999 ES300 had 2 successive incidents of check engine light (CEL) - and I found myself regretting the lack of any code reader.

    I would rather have 1 tool to take care of all our vehicles. But rather reluctant to buy a used Laptop just for this purpose. Am thinking of first trying to install XP Virtual machine VM on my windows 10 Laptop. If that doesn't then will go for a used Laptop.
     
    #38 Sanjay Goel, Mar 1, 2018
  19. Sanjay Goel

    Sanjay Goel Member

    Joined:
    Feb 13, 2018
    83
    57
    0
    Location:
    Dallas, TX
    Vehicle:
    Other Hybrid
    Model:
    N/A
    #39 Sanjay Goel, Mar 1, 2018
    Prodigyplace likes this.
  20. ericbecky

    ericbecky Hybrid Battery Hero

    Joined:
    Mar 12, 2004
    4,379
    3,238
    1
    Location:
    Madison, Wisconsin
    Vehicle:
    2005 Prius
    Model:
    Two
    The main issue is that you are likely buying a pirated version of the Techstream software. So there may be some glitches. They can be worked around if you want to sit down for a few hours and figure out/learn something new. For some people that is a fun challenge. For others they simply want the path of least resistance.

    Torque Pro plus elm 327 device plus Android phone/tablet will take you less than 15 minutes to set up.
     
    #40 ericbecky, Mar 1, 2018
    MTL_hihy likes this.
(You must log in or sign up to post here.)
Page 2 of 3