1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Why are Gen3 quick struts so expensive? Double the Gen2 and other cars? Anybody know?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by daddycooling, Jul 19, 2017.

  1. daddycooling

    daddycooling Junior Member

    Joined:
    Feb 11, 2014
    30
    4
    0
    Vehicle:
    2010 Prius
    Model:
    III
    Why are Gen3 quick struts so expensive? Double cost of the Gen2 and other cars? Anybody know?

    I don't really want to tear apart the struts. Just unbolt and replace. I have 185k on my 2010 and still runs like our other 2010 with 80k with the exception of some bounce struggles at highway speeds on poor pavement. Thanks!
     
    #1 daddycooling, Jul 19, 2017
  2. tankyuong

    tankyuong Senior Member

    Joined:
    Nov 9, 2012
    1,555
    661
    0
    Location:
    Central MO
    Vehicle:
    2012 Prius c
    Model:
    II
    the bolt on ones aren't as good as the ones you have to assemble
     
    #2 tankyuong, Jul 19, 2017
  3. Jkan2001

    Jkan2001 Member

    Joined:
    May 22, 2017
    201
    62
    0
    Location:
    Dallas TX
    Vehicle:
    2010 Prius
    Model:
    Four
    They are pretty cheap, 240 shipped for 2 struts and 2 rear shocks from rockauto. KYB GR2/Excel oem equivalent.
     
    #3 Jkan2001, Jul 20, 2017
  4. daddycooling

    daddycooling Junior Member

    Joined:
    Feb 11, 2014
    30
    4
    0
    Vehicle:
    2010 Prius
    Model:
    III
    Were these the quick struts? Fully assembled? My mechanic doesn't mess with spring compressors anymore. Don't want to rebuild. Just remove and replace.


    iPhone ?
     
    #4 daddycooling, Jul 21, 2017
  5. Jkan2001

    Jkan2001 Member

    Joined:
    May 22, 2017
    201
    62
    0
    Location:
    Dallas TX
    Vehicle:
    2010 Prius
    Model:
    Four
    Just the strut, you reuse the original oem spring, tophat, hardware etc. Seems wasteful to buy new springs and hardware since they don't typically wear out. You're not rebuilding anything just re-assembling the spring into the new strut. Spring compressors are not a big deal.
     
    #5 Jkan2001, Jul 21, 2017
(You must log in or sign up to post here.)