What have you done to your c today?

Formfit hood protector. My hood has already suffered many chips after I relocated to Colorado.

 

here's the skidplate before plastics install:


after plastics install :

 

So I got the OEM Door Edge Guards installed at the dealership but their installer did a super crappy job and installed them unevenly.

Anyone know if I strip them off will it mar the door edges? Planning to buy another set and install them myself to my liking!

Thanks in advance for the help!

 

I have the same one but have yet to install. How difficult was it to put on?


iPhone ?

 

Installed a usb connector in the rear center console for the back passengers.

 

I like the idea. I had to put a usb hub on the area that's exposed after you slide the armrest forward.
How did you access the underside of that armrest? I'd like to see if I can copy you.

 

There are 2 caps on the back of the center console and there are 2 screws behind the caps. I opened the cup holder part and there are 3 screws there. After that it is just clipped in. I ran the wires from the bottom after you remove the cover.
If your going to do what i did, double check the clearance because my first cut was too high, the usb adapter i had hit the bottom of the armrest. 2nd cut was just fine. I brought another panel from a junk yard because i messed the first one up.

 

Ah, thanks for the heads up. I was thinking that location would be awesome for an acc port and plugging in a mini fridge for long trips, but I may have to rethink that.

 

It wasn't very difficult at all, the hardest part was measuring for the adhesive posts. All the measurements are in mm, but the tape measure I have is only in inches, so I had to do conversions. The instructions make it look much harder than it is.

 

Good to know! Thanks. May try to tackle it this afternoon.


iPhone ?

 

Here is the newest addition. a lip for the front of the car bought off of ebay

 

Looks good. Is that the universal flexible kind? I've been looking at those for a while. The plastic black piece that is currently on there (under the bumper) is all scratched up...


iPhone ?

 

Yes it is rubber and the trim piece comes in different colors, here is the product name from ebay "MIXSUPER Rubber Bumper Lip Splitter Chin Spoiler EZ Protector RED for Toyota" The rubber on this version is a little stiffer than the ez-lip version I had on my 2012.
This one came with screws as well as the 3m tape, the screws are needed for the 2015 because of the angle from the front to the fog light.

MIXSUPER Rubber Bumper Lip Splitter Chin Spoiler EZ Protector RED for Toyota | eBay

 

Car99 by Justin Hargrove posted Jun 16, 2017 at 5:23 PM

Took my hub caps off so I went and bought some grease covers from napa. $14 total. This car is my work horse so Im not worried about looks but in my opinion this was a cheap upgrade.

 

That looks really cool! I run my car without hubcaps in the winter time because of all the potholes - I'll have to get some of them.

 

Plasti dipped a bunch

Posted via the PriusChat mobile app.

 

painted and installed the JDM hatch spoiler. And made a video for it.

 

Touched up some plastidip, washed and waxed, and got my roof rack installed. What do y'all think? A guy in a wrx was on his way out of the lot when he stopped and backed up just to tell me how good it looked



Posted via the PriusChat mobile app.

 

I think you got some on your license plate.

 

I scribbled on it just cause I posted it on instagram.


Posted via the PriusChat mobile app.