Protecting the doors and garage

very creative, well done!

 

Pool noodles have so many creative uses!

 

FWIW I purchased a product similar to this one a number of years ago when we still had two cars. Down to one car now so we park in the middle of the garage...

Evelots�� Black Vehicle Door Protector, Garage Wall Protector Guard - Walmart.com

 

Nice...
attractive garage addition.

 

I'd recommend PVC rather than the heavier metal pipe.

 

Just another data point. And yeah, it's happened more times than I care to admit.

 

Murphy's Law applies generally, and liberally..

 

good one mendel. i have block foam taped to mine, but yours looks cleaner, and makes more sense.
i just lowered the door the other day with the hatch open for the bajillionth time. no more scratches, but i'm wondering when the spoiler is going to fall off.

 

Looking back in my car's service history, I see that the spoiler was already replaced by the PO and the replacement damaged by the PO. It got further damaged by the other "PO," aka the Present Owner or the Po'd PO.

This mod won't protect me from closing the door on myself, but at least the spoiler doesn't bang and drag on the open garage door now. And I've made a cord I can quickly attach to keep the hatch from going all the way up if I'm going to have the hatch open for a while.

 

lol, that's a good one jerry. necessity is a mother...

 

Yeah, just assume you'll screw up, and you can't go wrong.

 

Use schedule 80 PVC or take out the sag by pre-stressing lighter PVC with slightly offset end clamps!

 

maybe an alternate design could skip the pipe, fasten the foam tube directly to the wall? Maybe split, a half-round section?

 

what's wrong with metal pipe, will the weight cause the garage wall to collapse eventually?

 

It's reducing clearance a bit.

My thought would be to use a half-round with OD same as foam tube ID, and split the foam in half. Then screw through the wood and countersink fairly aggressively into the foam with oversized washer.