1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Just got Prius Center Caps in the mail.

Discussion in 'Gen 4 Prius Accessories and Modifications' started by TinyTim, May 16, 2017.

  1. TinyTim

    TinyTim Active Member

    Joined:
    Nov 23, 2016
    369
    224
    0
    Location:
    Seattle
    Vehicle:
    2017 Prius
    Model:
    Two
    A quick question for Prius owners who removed the plastic hub caps. I am heading to the local Toyota dealer to have my 5k service checkup. I am going to have them remove the hubcaps and go with the alloy wheels underneath when they rotate and juice the tires.

    For those who have installed their own center caps. Do these look like they will work, fit or are similar to the not so modestly priced Toyota certified center caps? They are 57mm caps.
     

    Attached Files:

    #1 TinyTim, May 16, 2017
  2. David Beale

    David Beale Senior Member

    Joined:
    Jul 24, 2006
    5,963
    1,985
    0
    Location:
    Edmonton Alberta
    Vehicle:
    2012 Prius
    They will work if they are the correct diameter. They just snap into the hole. They are -hub caps- , as in covering the hub. The others are -wheel covers-, as in covering the entire wheel. ;)

    I bought the "expensive" Toyota ones at the dealer from the GII - cost me a whole $50 Canadian for four, which today is about $30 US.
     
    #2 David Beale, May 16, 2017
    RCO likes this.
  3. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,144
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Diameter is not the only factor though. The groove in the Gen 4 wheel is set further inward than in the Gen 2/3 wheel, so the caps designed to fit the Gen 2/3 doesn't fit in the Gen 4 without some modification.
     
    #3 xliderider, May 16, 2017
    RCO and Mendel Leisk like this.
  4. WilDavis

    WilDavis Senior Member

    Joined:
    Feb 4, 2014
    2,492
    2,154
    49
    Location:
    Top RH Corner of RH Coast on L side of The Pond
    Vehicle:
    2009 Prius
    Model:
    II
    I bought a set on eBay for about $26 which workperfectly! (see pics in my albums)
     
    #4 WilDavis, May 16, 2017
    RCO likes this.
  5. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,690
    39,236
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    ^ @David Beale : this is the case, nutty but true.
     
    #5 Mendel Leisk, May 16, 2017
  6. randomwalk101

    randomwalk101 DYI'er

    Joined:
    Feb 4, 2012
    532
    270
    0
    Location:
    texas
    Vehicle:
    2017 Prius Prime
    Model:
    Prime Advanced
    Except it's a wrong year model. Why are you posting in the Gen IV section anyways? Lol


    Nope..won't fit gen 4. Those are for older models.
     
    #6 randomwalk101, May 16, 2017
  7. WilDavis

    WilDavis Senior Member

    Joined:
    Feb 4, 2014
    2,492
    2,154
    49
    Location:
    Top RH Corner of RH Coast on L side of The Pond
    Vehicle:
    2009 Prius
    Model:
    II
    Well they fit my 2009 Gen II, oh! they don't fit yours? Well, all I can say is you seem to be mistaking me for someone who gives a shit! Have a nice life! ;)
     
    #7 WilDavis, May 16, 2017
    RCO likes this.
  8. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,690
    39,236
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I've been frog-marched outa 4th Gen forums more than once, just a few chauvinists, my impression.

    I came right back tho, lol.
     
    #8 Mendel Leisk, May 16, 2017
    Last edited: May 16, 2017
    Andyprius1 and RCO like this.
  9. TinyTim

    TinyTim Active Member

    Joined:
    Nov 23, 2016
    369
    224
    0
    Location:
    Seattle
    Vehicle:
    2017 Prius
    Model:
    Two
    Tiny Tim here again to check on my thread. My specific question was will these fit after I have the local dealership remove the hubcaps when they rotate and juice the tires? The nonsense posts such as gen 2 and gen 3 15" rims are different than Gen 4 or Gen 2 or Gen 3 owners posting in the Gen 4 forum.

    I will give it the old college try and see if they fit and keep you all updated on my endeavor.
     
    #9 TinyTim, May 16, 2017
    Andyprius1 likes this.
  10. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,690
    39,236
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Can you pop one wheel off and try? Gen 4 for sure has shifted the groove on interior of wheel hub opening.
     
    #10 Mendel Leisk, May 16, 2017
  11. tomstodola

    tomstodola Member

    Joined:
    Jan 6, 2011
    129
    20
    0
    Location:
    Ontario, California
    Vehicle:
    2019 Prius Prime
    Model:
    Prime Advanced
    Mine fit, but stick out about 1/4" Haven't fallen out, so I will stick with them for now.
     
    #11 tomstodola, May 16, 2017
    RCO likes this.
  12. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,144
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    The reason they are "sticking out" is that the tabs on the covers aren't able to drop into a groove on the inside of the hub. Perhaps removing the wire that reinforces the tabs from moving inward will allow the tabs to flex inward enough to allow the caps to be inserted further.
     
    #12 xliderider, May 16, 2017
    RCO likes this.
  13. TinyTim

    TinyTim Active Member

    Joined:
    Nov 23, 2016
    369
    224
    0
    Location:
    Seattle
    Vehicle:
    2017 Prius
    Model:
    Two
    Ok, back from the Toyota dealer. Got my complimentary Starbucks coffee and Coca Cola. Not a perfect fit but good enough. I do not want to risk breaking the center caps as suggested above by removing the wire to make the fit more snug. $8 worth of Chinese made plastic. I think it looks pretty good. For those who want a look at before and after.
     

    Attached Files:

    #13 TinyTim, May 16, 2017
  14. TinyTim

    TinyTim Active Member

    Joined:
    Nov 23, 2016
    369
    224
    0
    Location:
    Seattle
    Vehicle:
    2017 Prius
    Model:
    Two
    After a short run on the freeway to get a car wash. I checked on the center caps and realized that the centrifugal force and probably laws of kinetic energy and inertia locked the center caps in. To get them of I would need a screw driver as the laws of physics worked well securing these new center caps.
     
    #14 TinyTim, May 17, 2017
  15. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,144
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Or, remove the wheels and push them out from the other side. ;)
     
    #15 xliderider, May 17, 2017
    krmcg and RCO like this.
  16. RCO

    RCO Senior Member

    Joined:
    Aug 31, 2016
    3,709
    5,184
    0
    Location:
    Cornwall
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Oh the joys of 20/20 hindsight! (n)
     
    #16 RCO, May 17, 2017
(You must log in or sign up to post here.)