1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Changing Transmission Fluid Without Jack Stand or Ramps?

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by jbusta, May 13, 2017.

Page 2 of 2
  1. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    If it's not concrete, I'd recommend some plywood bases, or gauge plate, if you can swing it. Also, maybe a little over-the-top, but I always like to push a chunk of tree stump I have under first, something thicker than my rib cage. And take along a cell phone.
     
    #21 Mendel Leisk, May 15, 2017
    Fostel, MeMicah, bisco and 1 other person like this.
  2. Munpot42

    Munpot42 Senior Member

    Joined:
    Mar 12, 2012
    1,391
    543
    0
    Location:
    Santa Monica, Ca. 90405
    Vehicle:
    Other Hybrid
    Talk about unfair, I don't drink beer but I still have the gut. (must be the ice cream.)
     
    #22 Munpot42, May 16, 2017
    MeMicah and bisco like this.
  3. jbusta

    jbusta Junior Member

    Joined:
    May 1, 2017
    33
    13
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    Base
    Lastly, does anyone know much adequate clearance is needed (to lift up the prius) to perform most DIY work underneath? Thanks in advance!
     
    #23 jbusta, May 23, 2017
  4. Mendel Leisk

    Mendel Leisk EGR Fanatic

    Joined:
    Oct 17, 2010
    56,671
    39,221
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    I did a little measuring: the front bearing point I use is roughly 6.5" off the slab, when the car's down. The 6 ton safety stands I typically put in at that point have a cradle height roughly 15". So, a lift of 8.5". Now, that is generous clearance, more than enough. Maybe around 6" lift would be a decent mininum lift?

    What are most ramps btw, 8"?
     
    #24 Mendel Leisk, May 23, 2017
    jbusta likes this.
  5. jbusta

    jbusta Junior Member

    Joined:
    May 1, 2017
    33
    13
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    Base
    Exactly what I was looking for, mate! Thank you tons!
     
    #25 jbusta, May 23, 2017
    Mendel Leisk likes this.
  6. DivideByZer0

    DivideByZer0 Member

    Joined:
    Sep 13, 2017
    67
    91
    0
    Location:
    San Francisco, CA
    Vehicle:
    2005 Prius
    Model:
    Touring
    I tried this method a few minutes ago and it worked great! No problems at all
     
    #26 DivideByZer0, May 2, 2018
    Fostel likes this.
  7. KeystoneKid

    KeystoneKid Junior Member

    Joined:
    Mar 23, 2023
    17
    4
    0
    Location:
    Utah
    Vehicle:
    2012 Prius
    Model:
    Two
    Regarding lift, has anyone of you homebrewed the 2 x 4 wheel cribs you see videos about on YouTube? They appear a little weak to me but guys swear by them. I think I prefer the ramps in the front and jack stands in the back? Fear drove me to it! LOL
     
    #27 KeystoneKid, Mar 26, 2023
(You must log in or sign up to post here.)
Page 2 of 2