1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Replaced transaxle, new issues - ICE won't start

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by dlenox, Jan 1, 2017.

Page 2 of 2
  1. dlenox

    dlenox Junior Member

    Joined:
    Sep 20, 2005
    41
    2
    0
    I had taken the initial error codes and cleared them from vehicle's memory

    one stupid thing that I discovered inadvertently is that once a fatal error code gets displayed that the vehicle will not start up again unless the code(s) are cleared from the system... kinda sounds like a stupid thing to consider, but the code 'hangs out' till it is cleared and the computer sees the code and will refuse to start up unless it is cleared!!!

    this may sound like a fairly simple thing, but will burn you in the butt if you try to start the vehicle unless these previous code(s) are removed from the system!!

    I was able to check some more things out today and cleared the initial error codes via mini-vci software. the vehicle started up a couple of times and attempted to charge up the HV battery
     
    #21 dlenox, Jan 5, 2017
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    If your car will only start one time before needing a reset, then you have a high voltage leak
     
    #22 JC91006, Jan 5, 2017
  3. dlenox

    dlenox Junior Member

    Joined:
    Sep 20, 2005
    41
    2
    0
    jc91006,
    it seems that I can start vehicle up a number of times before a code reset is needed, trying to see a pattern but not discovered yet.

    patrick,

    got vehicle started up today but getting a couple new codes:
    P0A78 DC1:586
    P0AA6 DC2:526
    can you give me an idea what the additional codes imply?
    the replacement transaxle was out of same year vehicle (2005) and had 68k miles on it. the vehicle was involved in front end accident, on engine/passenger side

    thanks, dan
     
    #23 dlenox, Jan 6, 2017
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,133
    50,050
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    did someone once pinch a wire while putting the tranny back in?
     
    #24 bisco, Jan 6, 2017
  5. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    P0A78 means a problem with the inverter or wiring harness
    P0AA6 means a high voltage ground fault. A component exposed to high voltage has a voltage leak to body ground. The two likely possibilities are the traction battery where a module has an electrolyte leak, or a transaxle stator winding has faulty insulation.
     
    #25 Patrick Wong, Jan 6, 2017
  6. dlenox

    dlenox Junior Member

    Joined:
    Sep 20, 2005
    41
    2
    0
    nope, I did all the work myself.
    looking more like I ended up getting a bum transaxle, all that work for nothing...

    If anyone is interested I have a 2005 Prius for sale - with extra transaxle.
     
    #26 dlenox, Jan 7, 2017
(You must log in or sign up to post here.)
Page 2 of 2