1. Attachments are working again! Check out this thread for more details and to report any other bugs.

2012 Prius v (lowercase v) heater problem

Discussion in 'Prius v Care, Maintenance and Troubleshooting' started by Littlei, Jun 30, 2015.

  1. Littlei

    Littlei Junior Member

    Joined:
    Jun 30, 2015
    2
    0
    0
    Location:
    Chicago, IL
    Vehicle:
    2012 Prius v wagon
    Model:
    Two
    I bought a new Prius v (lowercase v for the Prius v wagon) in 2012 & have hit 36,000 miles with no problems but now on chilly mornings when I want some heat, it only blows lukewarm air! Ex: Outside temp shows 63, I put it up to 75 and even after driving most of way to work, still blowing cool! Turned it up really high to 85 and slightly warmer. What's going on??!!
    Noticed no one in forum writes about this problem. Help. (n)
     
    #1 Littlei, Jun 30, 2015
  2. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    that's a stumper. could be the thermostat, or a clog in the system, or the damper not moving all the way. sonds like a trip to the dealer, or a decent mechanic.
     
    #2 bisco, Jun 30, 2015
  3. rdgrimes

    rdgrimes Senior Member

    Joined:
    Jun 7, 2013
    1,740
    446
    4
    Location:
    New Mexico, USA
    Vehicle:
    2018 Prius Prime
    Model:
    N/A
    Use auto mode. When its warmer outside it won't heat the air as much as when its cold out. You can't judge by the feel of the air coming out of the vents. Just set it at the temp you want it to be and don't worry about it unless you feel cold.
     
    #3 rdgrimes, Jun 30, 2015
  4. Bashpriusv

    Bashpriusv Junior Member

    Joined:
    May 26, 2016
    2
    0
    0
    Location:
    Montréal
    Vehicle:
    2012 Prius v wagon
    Model:
    V
    Have you solved your problem with heater? If so pls advise what was the issue because I have the same problem.
    Thanks
     
    #4 Bashpriusv, Dec 20, 2016
(You must log in or sign up to post here.)