New plastic lift hatch, painting q

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by simplifying, Aug 18, 2016.

  1. simplifying

    simplifying Junior Member

    Joined:
    Jun 3, 2016
    33
    4
    0
    Location:
    Lawrence, Kansas
    Vehicle:
    2006 Prius
    Model:
    N/A
    I just received a new lift hatch unit from Amazon which is black, unpainted plastic. I have a couple of questions:

    1. Will I need to apply a primer before I spray paint it and put a clear finish on it?

    2. The paint company I plan to order the spray paint and clear finish sells a 14 dollar mask to use while apply the spray paint. Is that necessary?

    Thabnkyou.
     
    #1 simplifying, Aug 18, 2016
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,601
    8,478
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    do you have a link for the item? Your car is 10 years old, I don't think your paint job has to be perfect....it'll still somewhat match
     
    #2 JC91006, Aug 18, 2016
  3. simplifying

    simplifying Junior Member

    Joined:
    Jun 3, 2016
    33
    4
    0
    Location:
    Lawrence, Kansas
    Vehicle:
    2006 Prius
    Model:
    N/A
    #3 simplifying, Aug 18, 2016
  4. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,601
    8,478
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    If you need a black one, I have a perfect condition one for $100
     
    #4 JC91006, Aug 18, 2016
  5. simplifying

    simplifying Junior Member

    Joined:
    Jun 3, 2016
    33
    4
    0
    Location:
    Lawrence, Kansas
    Vehicle:
    2006 Prius
    Model:
    N/A
    Nope, I already have what I need. Just need to know if I need primer or not to paint the plastic before applying the color and clear coat.
     
    #5 simplifying, Aug 18, 2016
  6. Kenny94945

    Kenny94945 Active Member

    Joined:
    Mar 24, 2016
    831
    410
    0
    Location:
    Sausalito
    Vehicle:
    2016 Prius v wagon
    Model:
    Four
    Primer would be suggested to increase adhesion.

    The mask, your call.
    Home Depot et al may have lower cost options.
    Paint fumes into the lungs suck.

    Have fun.
     
    #6 Kenny94945, Aug 18, 2016
  7. simplifying

    simplifying Junior Member

    Joined:
    Jun 3, 2016
    33
    4
    0
    Location:
    Lawrence, Kansas
    Vehicle:
    2006 Prius
    Model:
    N/A
    Thank you all for your responses! This is a great chat site!
     
    #7 simplifying, Aug 19, 2016
  8. CrazyLee

    CrazyLee Member

    Joined:
    Aug 3, 2014
    153
    24
    0
    Location:
    Muskegon, MI USA
    Vehicle:
    2004 Prius
    Model:
    II
    Primer helps to reduce paint sagging. If the paint sags, then wait until it is really dry, coat the sag with Bondo Glazing & Spot putty. Spread sparingly over the sag. Let dry. Block sand the area until all the spot putty is gone. The sag will be gone too
     
    #8 CrazyLee, Aug 19, 2016
(You must log in or sign up to post here.)