1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Touchscreen misalignment

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by jafca09, Jul 20, 2016.

Tags:
  1. jafca09

    jafca09 Junior Member

    Joined:
    Sep 30, 2009
    34
    0
    0
    Location:
    Bay Area, California
    Vehicle:
    2010 Prius
    Model:
    IV
    My 2010 Prius' touchscreen went from working perfectly fine one day to not working the next. When I try to tap one of the virtual buttons, it will trigger something else, leading me to believe it is misaligned somehow. Has anyone experienced anything similar? Anything I can do without having to take it into the dealer or purchase something new? Thanks!
     
    #1 jafca09, Jul 20, 2016
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    check the menu, maybe there's an alignment selection
     
    #2 JC91006, Jul 20, 2016
    tony2ltr likes this.
  3. jafca09

    jafca09 Junior Member

    Joined:
    Sep 30, 2009
    34
    0
    0
    Location:
    Bay Area, California
    Vehicle:
    2010 Prius
    Model:
    IV
    The problem is I can't navigate to anything given the misalignment.
     
    #3 jafca09, Jul 20, 2016
  4. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    try to reset your car, unplug the 12v battery negative for a minute and see what happens
     
    #4 JC91006, Jul 20, 2016
  5. jafca09

    jafca09 Junior Member

    Joined:
    Sep 30, 2009
    34
    0
    0
    Location:
    Bay Area, California
    Vehicle:
    2010 Prius
    Model:
    IV
    Thanks for the suggestion. Any other ways to go about it though, as I don't have the proper tools with me to disconnect the bolts...?
     
    #5 jafca09, Jul 20, 2016
  6. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    You might not need any tools, on gen2 cars, there's 2 plugs you and just unplug that are on the battery components. I don't know the proper term for those things. Unplug them and plug them back after a minute or 2. I would think gen3 cars would be similar in design

    If you needed a tool, it would only be a 10mm wrench. That's all that holds the negative terminal or the bolt to the body ground....both are 10mm and you can disconnect either one.
     
    #6 JC91006, Jul 20, 2016
  7. jafca09

    jafca09 Junior Member

    Joined:
    Sep 30, 2009
    34
    0
    0
    Location:
    Bay Area, California
    Vehicle:
    2010 Prius
    Model:
    IV
    Now the unit is completely unresponsive to touch – and the Toyota dealership says it would need a whole new unit to work properly.

    I can survive without the touchscreen, using my phone for GPS and audio through Bluetooth. My problem is that I will be getting a new phone and can't seem to add a new phone without touching some settings on the touchscreen. Any advice on a way to get around this? It seems a waste to buy a whole new unit just to add a new phone.
     
    #7 jafca09, Aug 23, 2016
  8. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    I think it would be cheaper to just use the phone as is and take the bus
     
    #8 JC91006, Aug 23, 2016
(You must log in or sign up to post here.)