1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Dropped the parking light into housing

Discussion in 'Prius v Care, Maintenance and Troubleshooting' started by rspeaker, Jun 9, 2016.

  1. rspeaker

    rspeaker Junior Member

    Joined:
    Jul 22, 2014
    19
    7
    0
    Location:
    Colorado
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    I was trying to take out the parking light, and it fell out of the connector and into the housing. And I don't see any easy ways of getting it out! Thoughts?
     

    Attached Files:

    #1 rspeaker, Jun 9, 2016
  2. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,144
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    You're not the first person to have this happen, and you'll likely not be the last. ;)

    People have had some success using a coat hanger wire with a bit of tape on the end, or a small grabber tool, through the highbeam bulb mounting hole.

    Or, you can remove the headlight assembly from the car and try to shake it out from the previously mentioned mounting holes.
     
    #2 xliderider, Jun 9, 2016
  3. RRxing

    RRxing Senior Member

    Joined:
    Jul 7, 2009
    2,522
    1,797
    0
    Location:
    NEPA
    Vehicle:
    Other Hybrid
    Model:
    Limited
    That's what I did. Removed the high beam bulb, grabbed it with my grabby tool.
     
    #3 RRxing, Jun 9, 2016
  4. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    7,921
    3,144
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    Grabber tool costs a few bucks, available at auto parts or hardware stores:

     
    #4 xliderider, Jun 9, 2016
  5. rspeaker

    rspeaker Junior Member

    Joined:
    Jul 22, 2014
    19
    7
    0
    Location:
    Colorado
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    Yeah, I actually bought one and tried going through the high-beam (seemed like the first logical thing,) but the tool was too big, and was the only one they sell. May look online. Or wire hanger plus tape. Thanks!
     
    #5 rspeaker, Jun 9, 2016
  6. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,044
    1,112
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    Turn car upside down and shake until released?

    Or smaller grabby tool, your choice.
     
    #6 Air_Boss, Jun 10, 2016
(You must log in or sign up to post here.)