So.....I never register any yellow blocks (squares) on the bottom car pic with the arrow down which I am assuming is deceleration while I'm driving - BUT - when I shut the car off - it registers, why? Just before I shut the car off >> Then I shut the car off and get this >>
The deceleration blocks only show when you come to a standstill. Then they all reset again as you start moving. Each time you come to a stop it will show the deceleration blocks for that stop.
Of course you'll get better fuel economy if you don't accelerate as hard, but I don't get the point. I'll use what ever amount of acceleration I need to get up to the speed of traffic or go from a stop light. Does the car program itself to get better fuel econ if you're within the blue line?
