2006 ignition falure after replacing both batteries

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by imano, May 15, 2016.

  1. imano

    imano New Member

    Joined:
    May 15, 2016
    4
    0
    0
    Location:
    arkansas
    Vehicle:
    2006 Prius
    Model:
    II
    I replaced hv battery and starter tried one time to engage and then nothing. i replaced 12v and still nothing. switch powers on and when pushed again simply powers down.
     
    #1 imano, May 15, 2016
  2. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,489
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    When was the last time the car operated correctly without any warning lights on?

    What does "starter" mean in your first sentence?
     
    #2 Patrick Wong, May 15, 2016
  3. ericbecky

    ericbecky Hybrid Battery Hero

    Joined:
    Mar 12, 2004
    4,379
    3,238
    1
    Location:
    Madison, Wisconsin
    Vehicle:
    2005 Prius
    Model:
    Two
    Are there error lights on the dash?
    Did you correctly reseat the orange safety plug in the HV battery? It is a 3 step process ending with sliding the handles downwards.
     
    #3 ericbecky, May 15, 2016
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    111,181
    50,611
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    welcome to priuschat! how many miles on her?
     
    #4 bisco, May 15, 2016
  5. imano

    imano New Member

    Joined:
    May 15, 2016
    4
    0
    0
    Location:
    arkansas
    Vehicle:
    2006 Prius
    Model:
    II
    i replaced the high voltage battery about 1 year ago. without any issue. Approximately 1 month ago the "red triangle" and associated lights and codes returned. i contacted the the parts people that had supplied the replacement battery and they had another Dorman battery shipped in. i replaced the battery expecting that order had been returned to my universe, however when i tried to start the prius the engine attempted to start and then there was an audible pop from behind me and then nothing. i replaced the 12v battery for good measure and re-installed the still operational " coding" battery without success. The start button is pushed and all the lights come on and when i depress the brake pedal and push the the start button a second it just turns off.
     
    #5 imano, May 22, 2016
  6. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,600
    8,478
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Did you install the orange safety plug on the hv battery correctly?

    What code did you get to determine battery was at fault?
     
    #6 JC91006, May 22, 2016
  7. imano

    imano New Member

    Joined:
    May 15, 2016
    4
    0
    0
    Location:
    arkansas
    Vehicle:
    2006 Prius
    Model:
    II
    approximately 170000 miles. it was operating when i replaced the battery.
     
    #7 imano, May 22, 2016
  8. imano

    imano New Member

    Joined:
    May 15, 2016
    4
    0
    0
    Location:
    arkansas
    Vehicle:
    2006 Prius
    Model:
    II
    the replace hybrid battery code. there were others that stayed gone after being reset but the replace Hybrid battery code always returned. the plug is correctly installed.
     
    #8 imano, May 22, 2016
  9. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,600
    8,478
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Then you have a bad replacement battery
     
    #9 JC91006, May 22, 2016
  10. M in KC

    M in KC Active Member

    Joined:
    Jun 21, 2014
    358
    106
    0
    Location:
    KC, MO
    Vehicle:
    2005 Prius
    What JC says above.
     
    #10 M in KC, May 22, 2016
(You must log in or sign up to post here.)