Broken armrest. Any ideas?

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by Aaron Vitolins, May 6, 2016.

Tags:
  1. Aaron Vitolins

    Aaron Vitolins Senior Member

    Joined:
    Feb 28, 2014
    1,612
    1,144
    0
    Location:
    Franklin TN
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Broken arm rest on my 2012 Prius. Not sure how it broke, it's driving me crazy to be honest. If I look in side the door panel (by pushing the arm rest in as far as I can) I see these plastic pieces that are broken.

    The problem is, they don't seem like clips. Just plastic pieces that were melted together in the factory. How am I going to fix this. Any ways of fixing broken plastic? The fix has to be pretty strong becuse when anyone opens the drivers door to get out they push right on that arm rest.
     

    Attached Files:

    #1 Aaron Vitolins, May 6, 2016
  2. mrbigh

    mrbigh Prius Absolutum Dominium

    Joined:
    Sep 6, 2005
    3,686
    699
    2
    Location:
    Long Island, NY
    Vehicle:
    Other Electric Vehicle
    Look through ebay for replacement used parts for cheap
     
    #2 mrbigh, May 6, 2016
  3. Aaron Vitolins

    Aaron Vitolins Senior Member

    Joined:
    Feb 28, 2014
    1,612
    1,144
    0
    Location:
    Franklin TN
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Couldn't find one. Think I must fix the door panel I have
     
    #3 Aaron Vitolins, May 6, 2016
  4. Rebound

    Rebound Senior Member

    Joined:
    Mar 11, 2010
    3,970
    2,621
    0
    Location:
    Portland, OR
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Check Craigslist for someone parting out a wrecked Prius. They all have door panels
     
    #4 Rebound, May 6, 2016
  5. Mendel Leisk

    Mendel Leisk Senior Member

    Joined:
    Oct 17, 2010
    57,961
    39,991
    80
    Location:
    Greater Vancouver, British Columbia, Canada
    Vehicle:
    2010 Prius
    Model:
    Touring
    Take it right off for a good look. Or at least pop it loose enough that you can get a good look at the back.
     
    #5 Mendel Leisk, May 6, 2016
  6. jdcollins5

    jdcollins5 Senior Member

    Joined:
    Aug 30, 2009
    5,131
    1,341
    0
    Location:
    Wilmington, NC
    Vehicle:
    2010 Prius
    Model:
    III
    I broke my arm rest while under 36/36 warranty. Dealer tried remelting plastic clips the first time. It only lasted a short while until it broke again. Dealer replaced the door interior panel this time.

    I have not had any issue since then.
     
    #6 jdcollins5, May 6, 2016
  7. Aaron Vitolins

    Aaron Vitolins Senior Member

    Joined:
    Feb 28, 2014
    1,612
    1,144
    0
    Location:
    Franklin TN
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I think i will try that. maybe i could melt the plastic back together?? hope i don't die!
    Thank you!
     
    #7 Aaron Vitolins, May 7, 2016
    jdcollins5 and Mendel Leisk like this.
  8. Kenny94945

    Kenny94945 Active Member

    Joined:
    Mar 24, 2016
    830
    410
    0
    Location:
    Sausalito
    Vehicle:
    2016 Prius v wagon
    Model:
    Four
    FWIW

    Melting is worth a try.

    Also Home Depot et al sell plastic specific glues which could supplement the melting to add strength.

    Yes, get the panel off and look.

    Good luck.
     
    #8 Kenny94945, May 7, 2016
  9. Montgomery

    Montgomery Senior Member

    Joined:
    Sep 11, 2015
    2,254
    2,241
    2
    Location:
    Orange County, CA
    Vehicle:
    2015 Prius
    Model:
    Two

    I agree. Removing the panel is easy and your repair (no matter which road you decide) will be easier overall.
     
    #9 Montgomery, May 7, 2016
  10. Aaron Vitolins

    Aaron Vitolins Senior Member

    Joined:
    Feb 28, 2014
    1,612
    1,144
    0
    Location:
    Franklin TN
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Thanks guys! Hopefully this week I can get some time to take off the panel. I'll watch a few YouTube videos on it. I took off the panels of my old Prius, surely it isn't much different. I will keep you guys updated
     
    #10 Aaron Vitolins, May 8, 2016
  11. icyrius

    icyrius Active Member

    Joined:
    Apr 10, 2016
    238
    113
    7
    Location:
    Florida, USA
    Vehicle:
    2014 Prius v wagon
    Model:
    Three
    No need to melt them. Just go to Walmart and buy plastic epoxy glue. My son's 2014 had four of them broken from previous owner. I applied two coatings. The first one was just to secure them in place. The second coating was generous to make the joins stiffer.
     

    Attached Files:

    #11 icyrius, May 13, 2018
    Fabian Joya, tony_2018 and Mendel Leisk like this.
(You must log in or sign up to post here.)