1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Washer Jets

Discussion in 'Prius c Care, Maintenance and Troubleshooting' started by Rishan, Dec 11, 2015.

  1. Rishan

    Rishan New Member

    Joined:
    Dec 11, 2015
    1
    0
    0
    Location:
    Sri Lanka
    Vehicle:
    2013 Aqua
    Model:
    III
    Hi Guys,

    I just noticed this in my Prius C/Aqua. The passenger side washer jet is slightly less powerful compared to other side. Is this normal?
     
    #1 Rishan, Dec 11, 2015
  2. Sean Nelson

    Sean Nelson Active Member

    Joined:
    Dec 30, 2014
    421
    182
    0
    Location:
    Vancouver, BC Canada
    Vehicle:
    2012 Prius c
    If it's not powerful enough to spread water over the area that needs to be cleaned then it's not normal. I haven't taken a close look at the jets on my Prius C, but on older cars I used to use a pin to clean them out and aim them where I wanted them to spray.
     
    #2 Sean Nelson, Dec 12, 2015
  3. AliIzad

    AliIzad Member

    Joined:
    Aug 21, 2012
    170
    72
    0
    Location:
    Southern California
    Vehicle:
    2012 Prius c
    Model:
    Three
    Ditto, I use a very small sewing needle on my older car. No problem with the C yet.
     
    #3 AliIzad, Dec 12, 2015
  4. AQUA-K

    AQUA-K Junior Member

    Joined:
    Sep 9, 2015
    62
    12
    1
    Location:
    Sri Lanka
    Vehicle:
    2015 Aqua
    Hi... not so on mine. It shouldn't be less powerful. Could be blocked, just do a visual check on both nozzles. The washer jet on Aqua is not adjustable so be very careful about using a pin or any other object. Try using the washer multiple times that might clear it.
     
    #4 AQUA-K, Dec 13, 2015
(You must log in or sign up to post here.)