1. Attachments are working again! Check out this thread for more details and to report any other bugs.

05 Prius Engine Shaking/Knocking

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by DKG1011, Sep 26, 2015.

  1. DKG1011

    DKG1011 Junior Member

    Joined:
    Jul 10, 2015
    22
    7
    0
    Location:
    Kansas
    Vehicle:
    2005 Prius
    Model:
    N/A
    Driving home the other day I noticed some vibrations up front. Reminded me of out of balance wheels. Then the check engine light started blinking. Then it was on steady, then blink, then steady... Took it easy the rest of the way home. Code reader said P0138 Oxygen sensor circuit high voltage bank 1 sensor 2, and P0304 Cylinder 4 misfire detected. At home is where I saw the engine shaking and extra noise from it (visions of piston rod slapping around in there). Removed plugs (original? tough to get out!), compression tested all 4 cylinders (130 to 140), new spark plugs (had they been in there for 196K miles?). Start engine and same, shake shake with some extra noises that weren't there before (car just sitting in driveway).

    Anyone have ideas what it could be? What else I can look at/check/test/rule out/rule in before towing it to dealer for their diagnosis? $3000 hybrid battery installed 5000 miles ago (2 months).
     
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Bad coil on cylinder 4. $100 fix. Make sure you buy oem Denso
     
    DKG1011 likes this.
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    Swap the spark igniters between cyl 1 and cyl 4, and see if the misfire moves to cylinder 1. If yes then replace the bad spark igniter. If no then look elsewhere, such as the cyl 4 fuel injector or perhaps a wiring harness connector fault.
     
    DKG1011, Daves09prius and valde3 like this.
  4. DKG1011

    DKG1011 Junior Member

    Joined:
    Jul 10, 2015
    22
    7
    0
    Location:
    Kansas
    Vehicle:
    2005 Prius
    Model:
    N/A
    Swapped coils 1 and 4, started vehicle, new check engine light came on. Now shows codes P0300 (Random misfire detected), and P0301 (Cylinder 1 misfire). Before tonights swap I saw a narrow narrow crack in part of the original #4 coil (no arcing signs though). I've a densco coil reserved/ordered ($83). Why densco over other brands though? Also, can one misfiring cylinder cause the engine to shake and sound like there's something loose in the upper area of the engine? The sound and "inner feeling" is that it's coming from the head (upper, above pistons, valves/cams area) and at the cylinder 4 area (drivers side).
     
  5. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Changes the coil and your problems will go away.

    You use denso because all the other coils are the same brand, no compatibility issues
     
    #5 JC91006, Sep 27, 2015
    Last edited: Sep 27, 2015
    DKG1011, Daves09prius and valde3 like this.
  6. DKG1011

    DKG1011 Junior Member

    Joined:
    Jul 10, 2015
    22
    7
    0
    Location:
    Kansas
    Vehicle:
    2005 Prius
    Model:
    N/A
    Installed the new coil last night and was quite happy that the shaking and extra alarming noise went away. Smooth running engine again, no shake, no "banging" noises. I've seen engines get the shakes when you pull a plug wire when they are running, but I've never heard the "banging" noise that I heard from the Prius. Felt good to feel confident in my "ride" again going to work today! Thanks for the inputs!
     
    #6 DKG1011, Sep 30, 2015
    Last edited: Oct 1, 2015
    valde3 likes this.
  7. johnnyb588

    johnnyb588 Member

    Joined:
    Dec 19, 2014
    193
    73
    0
    Location:
    Tempe, AZ
    Vehicle:
    2005 Prius
    Model:
    I
    Another note about the "why Denso" question. I have a 2004 accord that I recently (25k miles ago) did a coil swap on. The original coils were on their way out after 175k. My options were Denso or Nippon for about $80 a coil, or try a no-name coil for $120 total for all six. Just for the fun of it, I went with the $120 option, and the coils just failed this past weekend (again, after 25k). The originals were Denso's, and even though they cost 4x more, they lasted 7x longer. I know this is anecdotal, but there are certain things it pays to skimp on. Coils aren't one of them, in my experience.
     
    DKG1011 likes this.