1. Attachments are working again! Check out this thread for more details and to report any other bugs.

06 prius transmission problem? I dont get it

Discussion in 'Gen 2 Prius Technical Discussion' started by kberven65, Aug 23, 2015.

Page 1 of 2
  1. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    Hello everbody new to the prius world! I recently purchased a 06 prius with 185k. Gas engine needed to be replaced so I recently replaced it. Had code of engine failed to start. Now got replacement engine in and has p0300 and p0303 and p0304. Weird thing is new plugs. Swapped coils and injectors with same results. To me it sounds like a racket in the the transmission. The noise is not consistent at all. Very loud and odd. Also inside the carwhen I put it in drive or neutral a warning light comes up and says shift to park batteries wont charge while in neutral. Thanks for any help. Ill post a video shortly that I have
     
    #1 kberven65, Aug 23, 2015
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    how did you diagnose the engine was the problem with the "failed to start"? There are many things that can cause thing, unrelated to the engine.
     
    #2 JC91006, Aug 24, 2015
  3. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    I work at a oyota dealership. Only thing that made sense. Now I don't know what to think. Also had no oil in it. I have a video. But it wont let me upload it. Would gladly txt it. 6052806390.
     
    #3 kberven65, Aug 24, 2015
  4. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    Dont wanna pay to hook it up again.
     
    #4 kberven65, Aug 24, 2015
  5. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    The service department can not help out a fellow employee?
     
    #5 JC91006, Aug 24, 2015
  6. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    They will but we have one toyota tech and hes really busy. And towing is another thing. Figured prius chat would be good help. Since ive gotten alot of info from here
     
    #6 kberven65, Aug 24, 2015
  7. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    B be fore engine sswap I had red triangle. With failed to strt. But with other engine has those other codes stated. I get red triangle in drive and neutral but still moves. Display says shift to park batteries wont charge in neutral
     
    #7 kberven65, Aug 24, 2015
  8. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    It would literally take a tech less than 5 minutes to diagnose your car with a proper code reader. If you can get the codes, we may be able to help. Without those codes and all the issues you are describing, it would be very difficult to pinpoint your problem.

    For all we know, the engine replacement might not even be necessary. No start issues usually does not mean replace engine.
     
    #8 JC91006, Aug 24, 2015
  9. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    P0300 p0303 p0304. will a regular code reader not get all the codes?
     
    #9 kberven65, Aug 24, 2015
  10. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    I have a video of exactly what it sounds.
     
    #10 kberven65, Aug 24, 2015
  11. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Post on YouTube and link
     
    #11 JC91006, Aug 24, 2015
  12. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
     
    #12 kberven65, Aug 24, 2015
  13. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    that's the old engine right?
     
    #13 JC91006, Aug 24, 2015
  14. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    No its the new one. Ran flawlessly for two hours prior. Sounds like electric motor is trying to engage
     
    #14 kberven65, Aug 24, 2015
  15. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,428
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    did you use OEM Denso or NGK plugs? Not sure what would cause a good running engine to misfire like that after 2 hours. Unless it overheated
     
    #15 JC91006, Aug 24, 2015
  16. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    Oem denso. After it started this. After its done with the first run. When it goes quiet I can push the accelerator down and engine sounds normal. Its always when it starts on its own
     
    #16 kberven65, Aug 24, 2015
  17. kberven65

    kberven65 New Member

    Joined:
    Aug 23, 2015
    24
    0
    0
    Location:
    pierre sd
    Vehicle:
    2006 Prius
    Model:
    N/A
    Anymore input. Will a regular obd2 code reader pick up other codes for tranny?
     
    #17 kberven65, Aug 24, 2015
  18. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,156
    50,059
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    you can buy mini vci for $25. if you have an old laptop.
     
    #18 bisco, Aug 24, 2015
  19. dat2109

    dat2109 Junior Member

    Joined:
    Jan 30, 2015
    26
    17
    0
    Location:
    Carolinas
    Vehicle:
    2006 Prius
    Model:
    II
    Any ole code reader can read those misfire codes. And it does sound like a prius misfire to me.
     
    #19 dat2109, Aug 25, 2015
  20. Britprius

    Britprius Senior Member

    Joined:
    Jun 14, 2010
    5,194
    1,917
    0
    Location:
    Herefordshire England
    Vehicle:
    2008 Prius
    As Bisco correctly informed you the VCI is the way to go giving dealer level of functionality at very low cost. It will read all!!! Toyota, Lexus, and Scion codes as well as performing tasks such as brake bleeding, and keyfob programming. If you work on a Prius in my opinion this is a must have. In fact I will modify that statement with if you own a Prius you should have the VCI.
    I am not in any way connected with the sale or manufacture of any type of code reader.

    John
     
    #20 Britprius, Aug 25, 2015
    Last edited: Aug 25, 2015
(You must log in or sign up to post here.)
Page 1 of 2