1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Changing a lightbulb what could possibly go wrong... ugh

Discussion in 'Gen 2 Prius Accessories & Modifications' started by wwinters, Aug 16, 2015.

  1. wwinters

    wwinters Junior Member

    Joined:
    May 30, 2014
    31
    18
    0
    Location:
    Long Beach, Ca
    Vehicle:
    2006 Prius
    Model:
    II
    This should have been a quick easy mod., change the interior lights with LED's. I took off the overhead light cover and tried to remove the first bulb but it wouldn't come out so I wiggled it a little and pushed and pulled a little next thing I know the light has popped back into the console and is nowhere to be found. Looking closer, I know what I did but now need to figure out how to get into that part of the the overhead console to put the light back in place and maybe some suggestions how to pull the bulb out once I've fixed my mistake.

    prius light 1.jpg prius overhead light 2.jpg
    Update- the other two bulbs came out easily and work great with the LED's
     

    Attached Files:

    #1 wwinters, Aug 16, 2015
    Last edited: Aug 17, 2015
  2. Beachbummm

    Beachbummm Senior Member

    Joined:
    Sep 12, 2013
    1,160
    392
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Five
    this is why Toyota charges $100 an hour for labor, they are TRAINED bulb replacement engineer's...

    my guess is the part that holds the bulbs will pop out if you move the clips towards the outer edge, of course they may break off and the light will hang down from now until doomsday ..

    maybe a video on youtube will save you, its worth a look
     
  3. wwinters

    wwinters Junior Member

    Joined:
    May 30, 2014
    31
    18
    0
    Location:
    Long Beach, Ca
    Vehicle:
    2006 Prius
    Model:
    II
    looks like I need to go buy molding remover tool, what could possibly go wrong...
     
    #4 wwinters, Aug 16, 2015
    Last edited: Aug 16, 2015
  4. frodoz737

    frodoz737 Top Wrench

    Joined:
    Aug 26, 2010
    4,297
    2,348
    33
    Location:
    Texas
    Vehicle:
    2015 Prius
    Model:
    Four
    This is 2010, but should be close.
     

    Attached Files:

  5. The Electric Me

    The Electric Me Go Speed Go!

    Joined:
    May 22, 2009
    9,083
    5,798
    0
    Location:
    Undisclosed Location
    Vehicle:
    Other Non-Hybrid
    Model:
    N/A
    Can I be the first to ask "How many Prius Owners does it take to screw in a light bulb?"
     
    valde3 and wwinters like this.
  6. frodoz737

    frodoz737 Top Wrench

    Joined:
    Aug 26, 2010
    4,297
    2,348
    33
    Location:
    Texas
    Vehicle:
    2015 Prius
    Model:
    Four
    Post #7 and counting.
     
    Burna J likes this.
  7. Burna J

    Burna J Knot Right Performance....

    Joined:
    Sep 18, 2012
    1,065
    3,335
    53
    Location:
    Long Beach, CA.
    Vehicle:
    2012 Prius
    Model:
    Three
    LED lighting now... (y)
    See what happens when you come over for one of our Mod Parties. Should I get with @sfv41901 and schedule you in for a lowering next.

    Just kidding.... :)
     
    wwinters likes this.
  8. JimN

    JimN Let the games begin!

    Joined:
    Nov 26, 2006
    7,028
    1,116
    0
    Location:
    South Jersey
    Vehicle:
    2010 Prius
    Model:
    V
    "How hard can it be?" and "What could possibly go wrong?" are always introductions to good stories. I hope this one turns out well.
     
  9. wwinters

    wwinters Junior Member

    Joined:
    May 30, 2014
    31
    18
    0
    Location:
    Long Beach, Ca
    Vehicle:
    2006 Prius
    Model:
    II
    I think he's going to do the bosectamy on my 99 miata first then maybe we'll lower the Prius and add power folding mirrors.
     
    Burna J likes this.
  10. Southpaw1969

    Southpaw1969 New Member

    Joined:
    Jun 27, 2015
    22
    1
    0
    Location:
    SoCal
    Vehicle:
    2007 Prius
    Ugh, I did the exact same thing on my 2007!

    How can we get those clips holding the assembly in place out? I'm afraid of breaking the thing and ruining it.

    I couldn't find a YouTube video on this. Anyone know of one?
     
  11. Beachbummm

    Beachbummm Senior Member

    Joined:
    Sep 12, 2013
    1,160
    392
    0
    Location:
    Florida
    Vehicle:
    2008 Prius
    Model:
    Five
    no one has ever done it so the world may never know
     
  12. JimInRadfordVA

    JimInRadfordVA Junior Member

    Joined:
    Jan 26, 2015
    10
    6
    0
    Location:
    Radford, VA
    Vehicle:
    2008 Prius
    Model:
    N/A
    Don't panic!

    I had the same thing happen to me. If I recall correctly, all I needed to do was pull down the entire housing and twist the socket back in. If you look closely, you may find a screw or two to remove first.

    Replacing the interior lights, the back-up lights and the live de plate lights was well worth the effort. The cost was negligible.

    Let us know what happens.
     
    wwinters likes this.
  13. wwinters

    wwinters Junior Member

    Joined:
    May 30, 2014
    31
    18
    0
    Location:
    Long Beach, Ca
    Vehicle:
    2006 Prius
    Model:
    II
    Finally got around to removing the housing. There were two screws in the sunglass compartment that needed to be undone then piece popped off without even needing to use the wedge tool I bought. I found the light socket rolling around (I assumed the light sockets were connected by wires but they weren't, securing the socket to the board completes the circuit) It was a very easy fix and the lights look good.
     
    frodoz737, valde3 and Burna J like this.
  14. wwinters

    wwinters Junior Member

    Joined:
    May 30, 2014
    31
    18
    0
    Location:
    Long Beach, Ca
    Vehicle:
    2006 Prius
    Model:
    II
    If you're talking about the white-ish plastic circle clips by the lights in my first picture,this stumped me also, they don't need to be removed. In my 06 there are two philips screws you'll see when you open the sun glass holder, unscrew these and use a molding tool (or I just gently pulled with my hands)to bring it down. My setup looked like what Valde3's posted.