1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Better cargo area lighting.

Discussion in 'Gen 2 Prius Accessories & Modifications' started by adric22, Jan 16, 2011.

  1. adric22

    adric22 Ev and Hybrid Enthusiast

    Joined:
    Apr 6, 2009
    642
    144
    2
    Location:
    Fort Worth, TX
    Vehicle:
    2018 Chevy Volt
    Model:
    Plug-in Advanced
    I got fed up with the wimpy little light bulb in the cargo area. This is especially important to me since I have an Enginer kit back there and if I ever needed to open it up in a dark parking lot or something, I'd never be able to see anything. I can barely see groceries back there. So I bought these two LED strip lights at AutoZone. What I did was pop the little light fixture out and soldered the wires directly to the bulb. I tried to solder to the metal in the fixture, but it proved resistant to soldering. I brought the wire out to two pigtails, one for the left side of the cargo area, one for the right. The lights are flexible and have a very sticky back so I just stuck them to the trim panel and drilled a small hole for the wire. I had experimented for a while to find the optimal position for these lights, and this area seemed to work best. Right now I only have one installed, soon I'll have the second one. I can tell you this, the result is fantastic. The lighting back there is tremendously better and it only cost $19.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    #1 adric22, Jan 16, 2011
    2 people like this.
  2. PhazonPhobe

    PhazonPhobe His name is Sora

    Joined:
    Oct 13, 2010
    221
    26
    28
    Location:
    Fontana, CA
    Vehicle:
    2004 Prius
    Model:
    N/A
    Ohhh. I like that. Seems pretty simple to do as well. I've always hate the lighting back there as well. I don't have an engineer's kit, but I basically have a whole tool box under the carpet, and I'm usually found using the flash light app on my phone to see wth is in there.

    I might even like to add a strip or two to the inside of the little compartment under the carpet. Seems like if you were to put one on each side (just stick it right to the plastic bucket/basket thing), it would light that area fairly well.
     
    #2 PhazonPhobe, Jan 16, 2011
  3. pEEf

    pEEf Engineer - EV nut

    Joined:
    Sep 23, 2010
    720
    578
    3
    Location:
    Berkeley, CA
    Vehicle:
    2008 Prius
    Model:
    N/A
    I also have a PHEV system back there and wanted more light. I ended up replacing the crappy incandescent bulb with a 3 watt LED to achieve the same result. I'll try to post pictures when I get a chance.
     
    #3 pEEf, Jan 16, 2011
  4. don_chuwish

    don_chuwish Well Seasoned Member

    Joined:
    May 1, 2009
    816
    182
    0
    Location:
    Southern Oregon
    Vehicle:
    2007 Prius
    Model:
    II
    #4 don_chuwish, Jan 16, 2011
  5. adric22

    adric22 Ev and Hybrid Enthusiast

    Joined:
    Apr 6, 2009
    642
    144
    2
    Location:
    Fort Worth, TX
    Vehicle:
    2018 Chevy Volt
    Model:
    Plug-in Advanced
    Yes, that is the exact product I used. I don't think it is 24", unless you count both strips. I just finished wiring up the other side and it looks great, I couldn't be happier with the concept.
     
    #5 adric22, Jan 16, 2011
  6. kenmce

    kenmce High Voltage Member

    Joined:
    May 4, 2004
    1,539
    513
    0
    Location:
    NY
    Vehicle:
    Other Hybrid
    Model:
    Limited
    #6 kenmce, Jan 23, 2011
  7. macmaster05

    macmaster05 Senor Member

    Joined:
    Sep 27, 2009
    4,050
    730
    5
    Location:
    USA
    Vehicle:
    2010 Prius
    Model:
    Two
    I'm using a 6 SMD LED festoon in place of the oem bulb and it is significantly brighter. The only problem is I had to pull back the clips pretty far to make the bulb fit.
     
    #7 macmaster05, Jan 23, 2011
  8. trentofdestiny

    trentofdestiny Master Finagler

    Joined:
    Aug 8, 2011
    1,104
    227
    0
    Location:
    Harrisburg, PA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Any thoughts on, say, a 12 SMD LED festoon?

    Such as, eBay item # 170668435584 for example
     
    #8 trentofdestiny, Aug 11, 2011
  9. Ryanpl

    Ryanpl Active Member

    Joined:
    Jun 24, 2010
    780
    158
    0
    Location:
    Brooklyn, NY
    Vehicle:
    2004 Prius
    Model:
    N/A
    I tried a 12 SMD and it didn't fit in the fixture with the cover.
     
    #9 Ryanpl, Aug 11, 2011
  10. trentofdestiny

    trentofdestiny Master Finagler

    Joined:
    Aug 8, 2011
    1,104
    227
    0
    Location:
    Harrisburg, PA
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    If you look for the incandescent part number equivalent, you of course come up with the 31mm festoon, BUT if you search eBay for a 28mm, you get a 28mm.

    Example: eBay item 140587233079
     
    #10 trentofdestiny, Aug 11, 2011
  11. newemi

    newemi Junior Member

    Joined:
    Aug 9, 2011
    43
    8
    0
    Location:
    Corona, CA
    Vehicle:
    2004 Prius
    Model:
    N/A
    Festoon Dome Lights from autolumination FTW.

    They have the replacements for festoons that are so freaking bright its ridiculous. I replaced the bulbs in my lancer with them and even though I have 20% tint all around. At night when I open the door you wouldn't have a clue. It's like the sun came up inside my car.

    The best ones are three quarters the way down that page, the 25-48 led array. The ones with the leds mounted on a small board/chip, and wired to the plastic festoon fake bulb. Or another easier option for a simple buy: Super Bright LED Car Interior Lights | Toyota Prius SMD LED Car Lights

    But the leds are not as good overall.
     
    #11 newemi, Aug 16, 2011
  12. jason petter

    jason petter Junior Member

    Joined:
    Sep 30, 2012
    13
    1
    0
    Vehicle:
    2012 Prius
    Model:
    Three
    To: adric22
    can you show more info how to install it ? where do you buy the "wire out to two pigtails" thanks
     
    #12 jason petter, Jul 9, 2015
  13. SunDevilDrake

    SunDevilDrake Junior Member

    Joined:
    Jul 3, 2015
    58
    21
    0
    Location:
    Gilbert, Arizona
    Vehicle:
    2007 Prius
    Model:
    Five
    I recently put in a 6 SMD LED in. OP could do the same so the original light and after market light match colors.

    Any new pics in the dark with both sides done?

    Radioshack (n)
     
    #13 SunDevilDrake, Jul 30, 2015
    Last edited by a moderator: Jul 30, 2015
(You must log in or sign up to post here.)