1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Pressing brake too hard?

Discussion in 'Prius v Care, Maintenance and Troubleshooting' started by Pogo Crafty, Jun 23, 2015.

  1. Pogo Crafty

    Pogo Crafty New Member

    Joined:
    Apr 30, 2015
    4
    1
    0
    Location:
    USA
    Vehicle:
    2012 Prius v wagon
    Model:
    V
    My 6'4" hubby just got in my PriusV 2012 to use it and when he tried to shift into reverse, the parking brake was on and the anti skid icon lit up. It would not shift into drive. When I got in to see what was going on, after he turned it off, everything worked fine for me. It has never done this before but he rarely drives it. Is it possible he was mashing the regular brake pedal down too hard? He wasn't hitting the parking brake getting in or anything like that, I watched when he tried a second time. We kept trying but he ended up taking his truck instead (which I was washing for him) I know on a couple occasions making fast, hard turns into our driveway I have lit up the anti skid icon but other than some extra braking action it has not caused a problem. And once while stopped at a light and reaching for something in the back seat, I lit it up, but I forget what the car did. I was mashing the pedal down hard as I reached back. I assume in both cases the car thinks I am getting in a wreck and is taking action.

    Of course, I just finished washing it but there is no chance it's anything with that? I moved it from the front yard to the back and had no issues before he tried to use it. Anyway, I had this thought about pressing the pedal too hard after he left and here I am asking.
     
    #1 Pogo Crafty, Jun 23, 2015
  2. Air_Boss

    Air_Boss Senior Member

    Joined:
    Jun 2, 2012
    4,037
    1,110
    0
    Location:
    New Yawk
    Vehicle:
    2012 Prius v wagon
    Model:
    Five
    I am 6'4", have a 2012 Prius v, have definitely mashed the pedal into ABS mode, but have never seen that occur.
     
    #2 Air_Boss, Jun 23, 2015
  3. rjparker

    rjparker Tu Humilde Sirviente

    Joined:
    Jun 6, 2008
    8,493
    5,057
    7
    Location:
    Texas Hill Country
    Vehicle:
    2012 Prius v wagon
    Model:
    Three
    That's the hill hold light coming on in all likelihood. By pressing down hard on the brake the system automatically prevents the car from rolling forward or backward, even when you release the brake, until you press the gas pedal.
     
    #3 rjparker, Jun 23, 2015
    Pogo Crafty and The Electric Me like this.
  4. rdgrimes

    rdgrimes Senior Member

    Joined:
    Jun 7, 2013
    1,740
    446
    4
    Location:
    New Mexico, USA
    Vehicle:
    2018 Prius Prime
    Model:
    N/A
    I think its a 2-3 sec delay regardless of if you push on the gas or not. The hill-hold feature should be accompanied by 2 beeps.
     
    #4 rdgrimes, Jun 23, 2015
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,135
    50,051
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    i don't think you can mash the brake too hard, except for the one guy who actually bent the brake lever on his c. what doe he normally drive?
     
    #5 bisco, Jun 23, 2015
  6. Pogo Crafty

    Pogo Crafty New Member

    Joined:
    Apr 30, 2015
    4
    1
    0
    Location:
    USA
    Vehicle:
    2012 Prius v wagon
    Model:
    V
    I think hill hold is the answer. I don't recall beeps but we were also hearing door open chimes, seat belt chimes, etc. I'll read up on it but is it something that you push the regular brake pedal to activate or is the parking brake involved? So if he goes lighter on the brake, he shouldn't have this problem? Thanks for replying too.
     
    #6 Pogo Crafty, Jun 23, 2015
  7. Pogo Crafty

    Pogo Crafty New Member

    Joined:
    Apr 30, 2015
    4
    1
    0
    Location:
    USA
    Vehicle:
    2012 Prius v wagon
    Model:
    V
    Yep. Hill hold. Thanks again.
     
    #7 Pogo Crafty, Jun 23, 2015
    bisco likes this.
  8. fuzzy1

    fuzzy1 Senior Member

    Joined:
    Feb 26, 2009
    17,557
    10,324
    90
    Location:
    Western Washington
    Vehicle:
    Other Hybrid
    Model:
    N/A
    Regular brake only, the parking brake is not involved.

    He doesn't really need to go lighter on the brake, he can keep his normal brake foot style. Just beware that without his foot of the gas pedal, once the hill holder gets triggered, the car won't roll on its own for a few seconds.
     
    #8 fuzzy1, Jun 23, 2015
    Pogo Crafty likes this.
(You must log in or sign up to post here.)