This has happened to me a couple of times...last night most recently. My gas gauge was flashing so I stopped for gas. I was only able to pump 3-4 gallons, before the hose shut off and every attempt to continue filling after that would only go a second or two before the hose shut off again. I was careful I though tto allow fumes not to build up since I imagined that might be why the hose was shutting off. I drove for a few miles and later that night stopped again at the same station and was able to fill up as expected. Comments?
common problem. the gen II has a rubber bladder inside the tank that can be finicky, to say the least. some recommend letting the tank decompress for a minute after removing the cap. then turn the pump handle 45-90 degrees from normal and pump as slow as possible. also, different pumps sometimes work better.