1. Attachments are working again! Check out this thread for more details and to report any other bugs.

TSB 0014-014 EV Charge Cable Plug Difficult to Insert or Remove

Discussion in 'Gen 1 Prius Plug-in 2012-2015' started by 13Plug, Aug 29, 2014.

  1. 13Plug

    13Plug Active Member

    Joined:
    Apr 7, 2008
    581
    104
    0
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    FYI the only deficiency I've found on my PHV Prius is the charge connector plug was hard to insert and remove. This was a few months back. By inspecting it I could clearly see that the rubber gasket/seal inside the charge cable plug connector was twisted.

    Well I must not have been the only one because Toyota has released a TSB on the issue. In my case this happened prior to their being a TSB, so the dealer just gave me a whole new charging cord (they said they do not attempt to repair anything hybrid related to the wiring).

    Anyway, long story short, the TSB simply tells the tech to remove that rubber seal using a pick or long flat blade screwdriver. Well it's good to know that if it happens again, I just need to pull that seal out and don't worry about it.

    Here's a quote:
    Let's see, here's the link to the TSB in PDF format, hope it works: http://www.revbase.com/BBBMotor/TSb/DownloadPdf?id=183534

    As an aside, I'd be curious to know if new 2014 Plug-Ins being produced now do not have that seal.
     
    #1 13Plug, Aug 29, 2014
    777zbr and Tracksyde like this.
  2. usbseawolf2000

    usbseawolf2000 HSD PhD

    Joined:
    Sep 22, 2004
    14,487
    3,000
    0
    Location:
    Fort Lee, NJ
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    Wait, they are removing the seal? I have no problem so far with my 2012. I think I'll keep it.
     
    #2 usbseawolf2000, Aug 29, 2014
  3. ny_rob

    ny_rob Senior Member

    Joined:
    Feb 28, 2012
    1,968
    813
    0
    Location:
    L.I.- NY
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I guess everything old is new again....
    We commented on this- and came to the same conclusion (remove the rubber "o-ring") back in Feb 2014 to solve the same problem.

    2012 PIP Charge Plug Tight | PriusChat

    I even had to remove the "o-ring" from the public ChargePoint station I use weekdays at work because of this problem.
     
    #3 ny_rob, Aug 29, 2014
  4. 13Plug

    13Plug Active Member

    Joined:
    Apr 7, 2008
    581
    104
    0
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    Yup, just take out the seal and done. Either Toyota doesn't trust techs to replace the seal or they can't, or it's too expensive to replace the whole cable when this happens, or the seal really doesn't do that much. Whatever the reason, I'm surprised the fix is to just throw the seal in the trash. Oh well at least if it happens again to me I know what to do.
     
    #4 13Plug, Aug 29, 2014
  5. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,135
    50,051
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    my L2 didn't even come with a seal. over engineering i guess.
     
    #5 bisco, Aug 29, 2014
  6. zhenya

    zhenya Active Member

    Joined:
    Sep 6, 2013
    649
    209
    0
    Location:
    Ithaca, NY
    Vehicle:
    2013 Prius Plug-in
    Model:
    Plug-in Base
    This just happened to me on one of my two factory cables. I just pushed the seal back in with a screwdriver and it works fine. It charges outdoors so I'd prefer to keep the seal if possible. Good to know the approved fix is so simple though.
     
    #6 zhenya, Aug 31, 2014
    Potorap likes this.
  7. ny_rob

    ny_rob Senior Member

    Joined:
    Feb 28, 2012
    1,968
    813
    0
    Location:
    L.I.- NY
    Vehicle:
    Other Hybrid
    Model:
    N/A
    I just took a look at my current charge cable/handle (Leviton A2055-PEV) that was purchased about four months ago.... it doesn't have an o-ring or even a cutout for one inside the handle.
    I guess that's how Leviton solves the o-ring problem! :)
     
    #7 ny_rob, Sep 2, 2014
  8. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,135
    50,051
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    on the other hand, my oem, which is used almost everyday in the elements still has the o ring in place. i wonder why it pulls out on some?
     
    #8 bisco, Sep 2, 2014
  9. usbseawolf2000

    usbseawolf2000 HSD PhD

    Joined:
    Sep 22, 2004
    14,487
    3,000
    0
    Location:
    Fort Lee, NJ
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    My O ring is still there. Almost 2 years of ownership.
     
    #9 usbseawolf2000, Sep 2, 2014
  10. nhguy78

    nhguy78 whirr...........

    Joined:
    Dec 6, 2008
    51
    3
    0
    Location:
    Hudson, NH
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Advanced
    I think it may be connected to how the plug is stored. Is it kept outside in the weather or in a dry garage or in a heated garage. Mine has deteriorated but for the first two years of ownership it was stored outside. Now I'm in a dry (non-heated) garage.
     
    #10 nhguy78, Mar 7, 2015
  11. usbseawolf2000

    usbseawolf2000 HSD PhD

    Joined:
    Sep 22, 2004
    14,487
    3,000
    0
    Location:
    Fort Lee, NJ
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    This winter, it is kept outside. Now, it is hard to plug to click. I am going to remove the O ring.
     
    #11 usbseawolf2000, Mar 7, 2015
  12. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,135
    50,051
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    mine is used once a day outside, thru all seasons. stored inside the car. so about 7-800 outdoor charges around an hour each, on average.
     
    #12 bisco, Mar 7, 2015
(You must log in or sign up to post here.)