My 2013 Prius TWO Build

Not on bags, yet. That's on RSR Black i coilovers my bags are ordered just not installed yet that is static set up at a conservative height with the RSR coils. I still have a lot of play with the adjustability. Needless to say not sure how much i'm lowered exactly but my fenders are rolled in the front, and pulled in the rear, have a -3 camber plate in the rear camber bolts in the front. Sitting about -4.5 in the rear. The wheels are all 18x9.5 +30 the gap from the fender to the rear wheel is very close, for the fronts I feel like I could put a 10mm spacer on and would have a better, more aggressive fit.

 

I don't know if a 20 offset is possible in the rear but for sure in the front. It would be possible in the rear with more camber obviously but I can't even put my finger between my fender and my tire with a 9.5 and 30 offset. And I have the camber plates.

And that's with a mild tire stretch..

 

Thanks a lot, much more work to do before WekFest, but it's come a long way so far nice to hear compliments for sure!

 

Yeah mine are pulled in the rear, they couldn't really roll them but they got pulled a bit. I think later on id like to get a new custom welded one too you can order them from Japan and request what camber you want up to -10 degrees.

Came home to this. Let the real fun begin

 

Thanks! Starting to assemble now! This should be fun!

 

Progress.

 

More progress. Not sure if I'm going to run a box or do a hidden set up going to make a box and see what it would look like first though. Poor quality on photos it's dark out I should stop using a saw so late. Lol

 

Yeah I mean realistically I could do it all myself. They are just doing the height sensors and struts. One because I've never done height sensors and two because they ordered the struts for me. And it's actually pretty cheap to get that done.

@si12j12 heres my newest set up, I didn't really want to run the box in the back so wasted money on wood but whatever. I wanted to use the Exo mount that I bought but decided not to use it and run it in the trunk area above the spare tire well. None of it is mounted down or anything so not looking like exactly it will be but it's close. This should cut down on the noise of compressors too. And easy install just bolt everything into place. I think I'll get another inlay for shows that will have a clear window to see through. Maybe throw some lights in there we will see how far I go with it I suppose.

I'm off to the big island today so won't be able to do any work for a little bit.

 

Thank you for following! This seems like a never ending project, but I just can't get enough of it haha.