1. Attachments are working again! Check out this thread for more details and to report any other bugs.

(!),ABS,VSC after stopping/restarting

Discussion in 'Gen 3 Prius Care, Maintenance & Troubleshooting' started by David S, Jul 23, 2014.

  1. David S

    David S Junior Member

    Joined:
    Apr 26, 2013
    8
    2
    0
    Location:
    Fort Lauderdale, FL
    Vehicle:
    2008 Prius
    Model:
    Two
    I have those 3 warning lights coming on after driving my 2008 Prius (60,500+) for appox 60+ minutes or more on a fairly warm day. High 80's+ in South Florida.

    I think that the heat buildup under the hood during a short stop is causing some component in the brake system to throw an error. Here are some pics....

    [​IMG] [​IMG]

    I took a screen shoot of what Torque was displaying. Not sure if the info is that big of a help in this case.

    Any insight would be appreciated. Thanks!

    images did not load for some reason. here are the links........

    Dropbox - TorgueScreen_2014-07-22_60345mi_(!),ABS,VSC.jpg

    Dropbox - Dash_2014-07-22_60345mi_(!),ABS,VSC.jpg
     
    #1 David S, Jul 23, 2014
    Last edited: Jul 23, 2014
  2. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,525
    8,429
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    check all your fluid levels in your car first (oil and coolant). make sure the coolant level is checked at the radiator cap and not at the reservoir. Your car might be overheating
     
    #2 JC91006, Jul 23, 2014
  3. David S

    David S Junior Member

    Joined:
    Apr 26, 2013
    8
    2
    0
    Location:
    Fort Lauderdale, FL
    Vehicle:
    2008 Prius
    Model:
    Two
    Thanks for the reply JC,

    That was all tested and checked. And you can see all the temps from the Torque app that all temps are good.

    I do think the heat buildup after the car has shut off is the problem. Figuring out the component that fails when above a certain will be the fun part.
     
    #3 David S, Jul 23, 2014
  4. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,482
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    1. When the Prius is READY, look for fluid turbulence within the inverter coolant reservoir. If you don't see this, the inverter coolant pump has failed.

    2. If the inverter coolant pump is OK and you still see those warning lights on, get Mini VCI so you can retrieve the DTC logged by the skid control ECU.
     
    #4 Patrick Wong, Jul 23, 2014
  5. David S

    David S Junior Member

    Joined:
    Apr 26, 2013
    8
    2
    0
    Location:
    Fort Lauderdale, FL
    Vehicle:
    2008 Prius
    Model:
    Two
    Thanks for replying Patrick.

    Inverter coolant is working fine. I am not familiar with the mini VCI. I gather it will give me info my $15 ODB II scanner will not (its not showing any codes).

    I'll take it to the dealer this weekend. I just bought the car 1 month ago and the said I had a 3 month/3000 mi warranty.
     
    #5 David S, Jul 23, 2014
  6. Todd Q

    Todd Q Junior Member

    Joined:
    Dec 6, 2012
    13
    2
    0
    Vehicle:
    2008 Prius
    Model:
    Four
    You mention the "Torque" app in one of your posts. I had this same problem when I started using the Torque App. If you unplug the adapter from the car, turn the car off, wait a couple minutes and restart the car without the Bluetooth adapter plugged in, the warning lights should be off. If you go into the profile settings in Torque for your prius you can select the mode to ISO 15764-4 CAN (11 bit 500k baud). This will narrow the data that is being passed through the device and into the prius that must set those trouble lights.
     
    #6 Todd Q, Jul 23, 2014
  7. David S

    David S Junior Member

    Joined:
    Apr 26, 2013
    8
    2
    0
    Location:
    Fort Lauderdale, FL
    Vehicle:
    2008 Prius
    Model:
    Two
    Hi Todd,

    Do you mean ISO 15765-4 CAN (11 bit 500k baud)? It's the closest one I can find.
     
    #7 David S, Jul 23, 2014
  8. Todd Q

    Todd Q Junior Member

    Joined:
    Dec 6, 2012
    13
    2
    0
    Vehicle:
    2008 Prius
    Model:
    Four
    Yes, you are correct ISO 15765-4 CAN (11 bit 500k baud) is the correct one. Pardon my fat fingers.
     
    #8 Todd Q, Jul 23, 2014
(You must log in or sign up to post here.)