Loss of regen brakes and traction assist.

This happened to me today with just a single OBDII reader and torque app. It started with the ABS light and traction lights going on and then progressed to the hybrid system warning and low oil pressure warning. My dash was lit up like a Christmas tree! It totally freaked me out as we're going on a long trip tomorrow. The only thing that I can think of causing this is that I checked a box to turn off the OBDII to save power in the torque app. I haven't tested it out yet.

 

I had a similar experience, when I used the Chinese OBDII Aadapter. After the replacement with better chip and design, all troubles dismissed.

 

It makes sense to me that the OBD interface could cause some problems. The software is capable of accepting commands from a scan tool through that interface, and some of those commands could shut things down if done at the wrong time. I remember doing the same with my AutoEnginuity on my old Ford Contour. I was playing with options going down the road while my wife was driving and I commanded a badly wrong timing advance and the whole thing shut off. My wife wasn't happy with me.

I've noticed that with my cheap OBD interface installed my reverse beep is down to one beep. I wonder if this is the same thing.

 

I maybe totally, wrong but isn't the ScanGauge actually "interogate" the bus sending in some code basically "give" this or that data ???

In which case a passive spliter can screw up (sometimes badly) what goes on the bus ...

 

I've used a Scangauge II on my 2010 Prius since I bought it in June 2009, prior to that had one on a 1997 Subaru Impreza which I gave to my daughter to use on her former Saturn Ion (thank God she sold that before the recall and had no incidents), she's using it on her 2009 Chevy Aveo and I have one on my 1996 Chevy S10. It has been the only monitor I have used and has done nothing but improve my mpg with no adverse effects. I've seen plenty of cheap and homemade units, I'm no programmer so I'll stick to what works for me.

 

I've been using UltraGauage for awhile now with no problems!