well that just looks like a overprice 16pin harness with extra video input(s) I just tried my 16pin harness again with a camera that works with 6.5v without using the boost converter and it seems to be the same result. Corolla head unit does detect camera (b/c on the display contrast/brightness set-up screen, a option to do a camera contrast/brightness shows up); however I guess the C2-1 doesn't come pre-wired to a reverse signal or whatnot, so the radio isn't switching to the camera when I put it in reverse. I guess the only thing I can do now is look at my wife's C4's wiring and compare it with my C2's radio wiring and see what's missing/different and go from there. QQ
well i thought it was already started that the C1 and 2 do not have the reverse signal wire in the harness from stock. you have to run the positive side of the reverse lights to the headunit. also for anybody who is not capable of doing this or does not want to pay the full price on the beatsonix harness. check out this website. Subaru 16-pin Rear Camera Harness apparently he custom makes the 16 pin harness to the way you need it. so you can email him and say you need the 16 pin harness that has reverse signal wire and video cable. ALSO JTORESS! who is a great member on this forum also provides a harness! find his profile and email him.
The one I post IS NOT a 16-PIN Harness, the AVC39 is a 28-PIN harness. This one goes where the steering wheel harness is right now, see pic below:
Sorry. Not specific enough. I see that's from a 2013 Highlander. Will other years work, and how about the range from a Corolla?
2012-13 corolla radio and only 2013 highlander radio. maybe the 2014s can work too but i am not sure about those.
Guys let me try to help, just about every Toyota radio will take a back up camera, on the Prius all you will need is to feed the video signal to the radio, if the radio doesn't detect the video from camera it won't switch over to camera input, depending on the camera you are using, sometimes the camera is a bit slow at turning on.. In some cases is best to use the acc wire on the main harness. That's the small grey wire ... Pleases test this wire to make sure it goes away when the key is out of the ignition... As always you can email me. Find my email now. Lol
Where did you get the face plate from? If you got it inline, can you share the link? I've bought a 2013 Highlander radio for my PC and I just need to find the faceplate.
I get it from JT Torres - Jt Torres | PriusChat The plate isn't on ebay or amazon as far as I know, just get in touch with him. JT Torres's plate is the only one so far that match 100% with the Highlander/Corolla radio.
So do the Scosche and Metra kits work with the 13 Highlander Radio or not? I'm a little unclear from what I've read so far. I know Jt Torres' kit is better aesthetically, but are there other important differences? SPH-L900 ?