Hi Have an 2011 prius. Need help with Scangauge II to change seatbelt to a single beep on both driver and passenger. Just got the scangauge but have no clue on using it. After that change on beeps I want to see see mpg usage. Any step by step would be great. Thank you
This thread should help or at least give you an understanding of using it: ScanGaugeII work on 2010? | PriusChat
Found this: thanks jdk2 But need help in order to put that set of number show do I go and do that exactly. Sorry I'm new to scangauge. Do I still need xgauge to make this happen? Thanks RobH said: ↑ Here's another few to try: 07 c0 3b a7 c0 Seat belt warning for both driver and passenger. 07 c0 3b a7 40 Seat belt warning for driver only. Untested WAG: 07 c0 3b a7 00 Seat belt warning disabled? Once again RobH comes through! These work perfectly as well! I couldn't test the passenger seat belt warning, but since 00 disabled the driver's side, I assume it's gone as well. I drove up to about 20mph and unclicked my belt. The warning light came on but no beep. I set it to C0 and tried again and sure enough, beeping. You still get the initial beeping when you first turn on your car. Connect your seatbelt before hitting start to disable that. Query Seat Belt Setting (stock result is C0) TXD: 07c021a7 RXF: 046115a70000 RXD: 2808 MTH: 000100010000 Set Seat Belt Setting Disable driver and passenger TXD: 07c03ba700 (or change last 00 to C0 for stock, 40 for passenger disable) RXF: 047b15a70000 RXD: 2008 MTH: 000100010000
Have a look at this: Google Drive You just enter the code in the above into SG. Have a read of the manual and it explains how to set it up for a hybrid. If you don't have the manaul, you can find it here: ScanGaugeII User Manual : Linear Logic
