i'm Andrea Giuggioli and i'm technical manager of an Italy based software house. We develop mainly Retail software and Profiling software. We're now starting to develop a very interesting solution wich involves the OBD-II, so we need someone who is able to help us in the development and we would understand if there is one developer open to a job collaboration with us. I think that the collaboration could be very profitable for you, because the solution is very big and could be a long term parthership. Best Regards Andrea Giuggioli
Andrea, I am not sure what you need, If you need hardware help and can be of assistance there as I have been working and tinkering on the various versions of the Hardware to interface to the OBD2 Port that are in use. The latest design of the OBD2 interface that I am working on uses a Scantool STN1170 Chip which is capable of driving HS-CAN, MS-CAN, SW-CAN, KWP2000, and the legacy PWM/VPW . It will interface to a Laptop using virtual com port USB2 at 2Mb/sec which is necessary to run virtual Dashboards at a resonable refresh rate. Winston.
