1. Attachments are working again! Check out this thread for more details and to report any other bugs.

keyless entry not working

Discussion in 'Gen 2 Prius Technical Discussion' started by Hard2Choose, Nov 7, 2012.

  1. Hard2Choose

    Hard2Choose Junior Member

    Joined:
    Mar 31, 2011
    5
    0
    0
    Location:
    California
    Vehicle:
    2008 Prius
    Model:
    N/A
    I have a 2007 with 247,000 miles. Recently when I go to get in the car in the mornings, the keyless entry will not work. Usually I just touch the doorhandle & it opens. It won't even open when I push the unlock button on the clicker. I have to take the key out of the remote to open the door. This only happens first thing in the morning when it is cooler & there is dew on the car. Later in the day, everything is fine. Any ideas?
     
    #1 Hard2Choose, Nov 7, 2012
  2. Jim Porta

    Jim Porta Junior Member

    Joined:
    Feb 17, 2009
    86
    17
    0
    Location:
    Louisville, KY
    Vehicle:
    2006 Prius
    Replace the button battery in your remote.
     
    #2 Jim Porta, Nov 7, 2012
  3. logopenn

    logopenn New Member

    Joined:
    Feb 16, 2014
    16
    0
    0
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    I have same problem I replaced the battery in fob now it won't work at all
     
    #3 logopenn, Feb 17, 2014
  4. bisco

    bisco cookie crumbler

    Joined:
    May 11, 2005
    110,179
    50,066
    0
    Location:
    boston
    Vehicle:
    2012 Prius Plug-in
    Model:
    Plug-in Base
    did you test the new fob battery before installing it?
     
    #4 bisco, Feb 17, 2014
  5. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,527
    8,429
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Put the old battery back and see if it works. Could be your new battery is not good

    SM-N900P ?
     
    #5 JC91006, Feb 17, 2014
  6. logopenn

    logopenn New Member

    Joined:
    Feb 16, 2014
    16
    0
    0
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    I did not test the new battery for fob and don't have the old one I can go buy a new battery for it again and see if that helps
     
    #6 logopenn, Feb 17, 2014
  7. logopenn

    logopenn New Member

    Joined:
    Feb 16, 2014
    16
    0
    0
    Vehicle:
    2005 Prius
    Model:
    ----USA----
    I went back to advance and got another battery tested it while I was there and it worked went out to the car and it worked unlock button does not work but the lock and when I walked up to the car and just open the door it works
     
    #7 logopenn, Feb 17, 2014
  8. JC91006

    JC91006 Senior Member

    Joined:
    Nov 10, 2013
    16,527
    8,429
    0
    Location:
    Los Angeles, CA
    Vehicle:
    2008 Prius
    Model:
    II
    Sounds to me you have a sticky button. That will normally drain your fob battery if it's stuck. You have to correct that problem or you'll be back to the situation again. Youtube has some videos on a sticky button

    SM-N900P ?
     
    #8 JC91006, Feb 17, 2014
  9. Kurzweil

    Kurzweil Member

    Joined:
    Aug 1, 2012
    109
    34
    0
    Location:
    Atlanta
    Vehicle:
    2010 Prius
    Model:
    III
    These fobs spend a lot of time in grimy pockets. I bought a $7.00 soft case for it (Amazon), similar to the cheapies you see for smart cell phones (couldn't find an expensive nicer one with some water resistant qualities). I put the FOB in a plastic bag before putting it in the case.
     
    #9 Kurzweil, Feb 19, 2014
  10. usnavystgc

    usnavystgc Die Hard DIYer and Ebike enthusiast.

    Joined:
    Jul 29, 2011
    3,159
    989
    0
    Location:
    Tucson, AZ
    Vehicle:
    2005 Prius
    Model:
    Four
    I got the same soft case. I love it so much, I bought one for my TCH as well.
     
    #10 usnavystgc, Feb 20, 2014
(You must log in or sign up to post here.)